Canon DR-9080C Service Manual page 141

No.
10 Open the document eject tray guide of the
DR-6080/9080C outwards. Install the endorser
main unit onto the delivery area of the
DR-6080/9080C. Make sure to hold the handles
of the right/left cover of the endorser. Also make
sure that the rear connector and the positioning
pin are inserted into the DR-6080/9080C, and
the lower front part of the right/left cover is fit
into the upper unit guide.
Note: Before installing the endorser, open the
document eject tray extension, if
needed.
11 Install the die drum 300.
Note: Attach the stamping plate properly.
12 Set the ink roller.
Note: If the height of the ink roller has to be
adjusted, use the adjusting screw,
which was adjusted in accordance with
the standard ink roller before shipping.
13 Check that the unit operates normally. For
details on how to operate it, refer to the user's
manuals for the DR-6080/9080C and ED600.
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
Procedure
CHAPTER 4 INSTALLATION & MAINTENANCE
Inspection/Remarks
Guide
(for each side)
View of opened document eject tray extension
4 - 13