Canon DR-9080C Service Manual page 158

CHAPTER 5 TROUBLESHOOTING
2. Installation procedure
The following procedure is for installing the
service mode software. Do not install it onto the
user's personal computer.
1) Power on the personal computer for service
and start the Windows OS.
2) Insert the Setup disk bundled with this
machine.
3) Copy the folder "\Driver\Tools" in the Setup
disk to any drive.
Note: To verify operation of this machine using the
personal computer for service, install any
necessary hardware. For details on how to
install the software bundled with this
machine, refer to the user's manual. When
checking specifications such as the number
of scanned documents, be sure the
personal computer for service satisfies the
personal computer system requirements
described in the User's manual.
5 - 8
3. How to start and exit
The procedure for starting and exiting from the
service mode is as follows:
1) Connect the personal computer for service to
the machine using a SCSI or USB cable.
2) After powering on the machine, turn on the
personal computer.
3) Open the installed "Tools" folder and launch
the file "QumaTool.exe" inside that folder.
Note: Application software, including
CapturePerfect, must be closed.
4) When the Password window appears, type
"quma" and click OK.
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
Fig. 5-302
Fig. 5-303