Count Only Mode - Canon DR-9080C Service Manual

Chapter 4 Document Feeding and Scanning

Count Only Mode

In the count only mode, the documents are fed through the scanner and the
number of the documents is only counted, they are not scanned.
1
Press the [Count Only] key on the operation panel of the scanner.
The Count Only key lights to indicate the Count Only mode.
2
Place the document in the document tray, aligning the document's
top edge against the back of the document tray. Press the [Start]
key.
The document is fed and the number of documents appears on the counter
display.
52
Count Only key