Call Transfer - AT&T 1040 Quick Reference Manual

0:0AM /2
00:0
0:0AM /2
00:0
TRANSFER LINE#
TO
0:0AM /2
EXT 
TRANSFER LINE #
TO 2
0:0AM /2
00:0
0:0AM /2
EXT 
INTERCOM TO
PAGE
0:0AM /2
EXT 
INTERCOM TO 2
0:0AM /2
EXT 
TRANSFER LINE #
TO 2
0:0AM /2
EXT 2
TRANSFER FROM 

Call transfer

Blind transfer
While on a call:
. Press [TRANSFER]. The outside call will
automatically be put on hold. You will see
TRANSFER LINE#Y TO (with Y being the line in
use) on the third line of the display.
2. Press the one-touch button for the destination
extension for the call.
-OR-
Dial the destination extension number to which destination extension number to which
you're transferring the call. You will see the
extension number on the fourth line of the
display.
. Hang up.
Your phone reminds you with a double-beep
every 0 seconds when a transferred call has
not been answered.
NOTE: : If you do not dial an extension
within 0 seconds, the transfer is automatically
canceled. The call is still on hold. Press the
corresponding LINE key to resume the call.
Transfer a call and speak to the receiving party
. While on a call press While on a call press
call will automatically be put on hold.
2. Press the one-touch button for the extension to
which you're transferring the call.
-OR-
Dial the extension number to which you're
transferring the call. You will see the extension
number in the third line of the display..
When the other party answers by pressing
[INTERCOM], you can announce the call.
4. Press [TRANSFER].
5. Hang up.
Answer a transferred call
When you hear a long transfer ring, pick up the
handset or press the [LINE] button of the call to
use the speakerphone or headset.
8
extension number to which
press [INTERCOM]. The outside
the