Transfer - AT&T SYSTEM 25 User Manual

Transfer

If you use
and busy calls will not be returned to your console and may
be lost.
When you transfer a call, the original party is temporarily placed
on hold and is not connected to the called party until you hang
up. At that time, the call disappears from your voice terminal.
Under certain circumstances, you may use
NOTE:
outside line. However, you should see your System
Administrator for more information about this type of
transfer.
Transferring a Call
1 Press
2 Dial the other party's PDC.
3 If you do not want to announce the call,
on the SLAC to extend calls, unanswered
to transfer an outside call over another
The light next to the button of the held call winks.
intermittently.
or
Dial the outside line access code and
telephone number.
If you misdial the number, return to
NOTE:
the held party by pressing the button next to
the winking light. Then return to step 1 and
continue.
simply hang up. Otherwise, announce
the call and then hang up to complete the
transfer.
If the called party does not answer,
NOTE:
press the button next to the winking light to
return to the held call.
and listen for dial tone.
8 7