Transfer - AT&T SYSTEM 25 User Manual

Transfer

You can easily transfer calls to another
You can also transfer some calls to outside lines. However, you
should see your System Administrator for more information
about this type of transfer.
When you transfer a call, the original party is temporarily placed
on hold and is not connected to the called party until you
hang up.
If you are transferring a queued call (see
NOTE:
"Callback Request" ), you must announce the call to
the transferred-to party.
Transferring a Call
1 Press the switchhook.
2 Listen for confirmation tone and dial tone.
3 Dial the other party's PDC.
4 If you do not want to announce the call,
If you misdial the number, press the
NOTE:
switchhook twice to return to the held call.
(If you hear dial tone, press the switchhook
once more.)
simply hang up. Otherwise, announce the
call and then hang up to complete the
transfer.
If the called party does not answer,
NOTE:
press the switchhook twice to return to the
held call. (If you hear dial tone, press the
switchhook once more. )
25 voice terminal.
System
29