Transfer - AT&T SYSTEM 25 User Manual

Transfer

You can easily transfer calls to another System 25 voice terminal.
You can also transfer some calls to outside lines. However, you
should see your System Administrator for more information
about this type of transfer.
When you transfer a call, the original party is temporarily placed
on hold and is not connected to the called party until you hang
up. At that time, the call disappears from your voice terminal.
Follow these steps to transfer a call.
1 Press
2 Listen for dial tone and then either dial the
3
50
T R A N S F E R
—
The green light next to the button of the
held call winks
other party's PDC or press a line button, for
example,
Note
If you misdial the number, return to the field
party by pressing the button next to the
winking light. Then return to Step 1 and
continue.
If you do not want to announce the call,
simply hang up. Otherwise, announce the
call and then hang up to complete the
transfer.
Note
If the called party does not answer, press the
button next to the winking light to return to
the held call.
.