Step 9
Attach the top end of Handlebar (29) onto the Rear U-Frame (2) and Pivot Arm
Reinforcement Plate (54) with one Hex Head Bolt (38), Lock Nut (15), and two Washers (13).
Attach the bottom end of the Handlebar (29) onto the Rear U-Frame (2) with one Hex Head
Bolt (43), Lock Nut (15), and two Washers (13).
Repeat above same steps to attach the others Handlebar (29) onto the Rear U-Frame (2)
and Pivot Arm Ring (54).
Hardware:
(43) Hex Head Bolt
ASSEMBLY
M8*38 2PCS
(38) Hex Head Bolt
M8*23 2PCS
(13) Washer
Ø20*Ø8.5*1.5
8PCS
(15) Lock Nut M8
4PCS
16
Tool:
Wrench 2PCS