Table of Contents
Advertisement
Deactivating and reactivating measuring channels
Since only 4 of the maximum 8 measuring
channels (option RH) can be transmitted over
a wireless link, individual channels can be ex-
cluded from data transmission in order to prio-
ritize those further back in the queue. In the
display a channel thus deactivated is followed
by two dashes.
The following table lists the steps needed to activate or deactivate a channel.
Step 1:
Selecting a
channel
Step 2:
Activating the
settings menu
Step 3:
Activating / de-
activating a
channel
Using key ▲ select the desired channel.
Press and hold down key ▼ .
In the menu the channel's current status is dis-
played.
Display ChAct The channel is activated.
Display ChOFF The channel is deactivated.
To leave the settings menu without saving any
changes briefly press any key (except key ▼ ).
Press briefly and release key ▼ .
This activates / deactivates the selected chan-
nel. After approx. 3 seconds the display re-
turns automatically to the measured value.
Measured value
ALMEMO
2790
®
19
Advertisement
Table of Contents
