Stop The Measurement; Store Data - Kimo DB 200 User Manual

E3 : this screen reminds the general format of the session of measurement:
Date of measurement start
•
Date of measurement end : not entered because measurement is still ongoing.
•
Measurement time : not entered because measurement is still ongoing.
•
Measurement mode : L-Leq
•
Frequency weighting for L and Leq : Weig.
•
Time weighting for L : Cst
•
Integration time for Leq : S/S (Start/ Stop mode)
•
Frequency weighting of the level of pressure peak for L : Lpk
•

5.3.4 Stop the measurement

We stopped the measurement manually through the
Note : The manual command (Start - Stop) has priority over the I/O command (even if the initial choice is a start from the I/O
command).
The pause function is inoperative.

5.3.5 Store data

At the end of the measurement, in manual mode, a screen of all results is displayed. It is then possible to :
➢ Accept measurements and store them : move the cursor on Sto. and press once on OK key to confirm. A banner displays the
storage phase.
Ongoing
measurement
➢ Reject measurements and not store them : move the cursor on RST and press twice on OK key to confirm. A banner displays
the phase of suppression of data.
Ongoing
measurement
Make some measurements
pictogram.
Results
Results
Deletion
Screen 3
Storage
RST active
14