Presentation; Content Of The Box; Terminal; Base ( Optional ) - Ingenico IWL2 series User Manual

2.

Presentation

2.1.

Content of the box

2.1.1.

Terminal

IWL2XX terminal unit
equipped with a paper roll
A user's guide
A battery pack disconnected
2.1.2.

Base ( optional )

A power supply unit that
Base
connect the base to the
mains network
WARNING
The power supply unit provided with your equipment is specially designed for Ingenico
terminals. Do not use any other power supply. The use of a power supply with apparently
similar voltage/current characteristics may damage your terminal.
ADVICE
Keep the packaging. It must be re-used whenever the terminal is shipped.
•
iWL2xx Wireless Series 5/32
900003061 R11 000 05/1122
Power supply unit (PSU)
(charging from the micro-USB
port of the terminal )
When the terminal is delivered
with a base, this PSU is
replaced b y a b ase PSU
A telep hone cable
(with base modem)
Copyright © 2011 Ingenico
All rights reserved
2.2.

Overview of the iWL2XX

Terminal unit
Large graphic display
Backlit
keyboard
Smart
card reader
Magnetic card
reader
Weight (without paper
290g for the R25 model and 310g for the R40 model
roll nor battery)
Dimensions (L x w x h) 150x76x44mmfor the R25 model and 164,5x76x53,5mm for the R40 model
Mains network 100-240VAC / 50-60 Hz - Class II equipment
Connections on terminal Micro USB AB serial link
Base unit
Base
Weight About 150g
Dimensions (L x w x h) 140,7x87,7x45 mm
Power supply unit
Weight About 100g
2pole sockets 1A (traveller power supply) or 1 A (base power supply)
Power supply units are specially fitted for INGENICO terminals.
•
iWL2xx Wireless Series 6/32
900003061 R11 000 05/1122
Easy loading printer
Compartment where are located :
•
the battery pack
•
the SAM1/SAM2/SIM connector
•
the module microSD
•
nd
the 2 Smart card reader
External
links
External
links
Copyright © 2011 Ingenico
All rights reserved