Docomo P-01B Instruction Manual
  1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. P-01B
  6. Instruction manual

Docomo P-01B Instruction Manual

W-cdma gsm/gprs system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-01B
'09.11
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-01B and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo P-01B

Summary of Contents for Docomo P-01B

  • Page 1 P-01B ’09.11 INSTRUCTION MANUAL...
  • Page 2 For Using This Manual and their operating procedures. (In Japanese only) ⿠Note that “P-01B” is referred to as “FOMA terminal” in this manual. ⿠Most operating procedures and displays in this manual are described http://www.nttdocomo.co.jp/support/trouble/manual/ with the default settings of the “Black”...

  • Page 3: Table Of Contents

    Introduction FOMA Terminal ····································2 Styles ···················································6 Contents What You can Do With P-01B ··············3 Precautions ··········································7 P.1 ～ ▶ Part Names and Functions ··················4 Handling Precautions ························15 Before Using ·····························18 Character Entry·························29 Lock/Security ····························36 Basic Charging, Power ON/OFF, etc. Security Codes, Various Lock Operation Functions, Reset to Default, etc.
  • Page 4 SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifi ers shall be responsible for any such damage or loss.
  • Page 5 What You can Do With P-01B ○○ Railway 使いかたナビ (Guide) Suspension of the You can check “使いかたナビ (Guide)” service now... Pedometer ▶ P.73 onscreen for how to operate a function Pedometer enables you you want. Even when you do not have to confi rm your pace and the printed “Instruction Manual”...
  • Page 6 Part Names and Functions ❶ Light sensor ❽+ �+ t Touchpad switch key h Power/End key ❶ � For sensing brightness (Do not For turning on/off the Touchpad For turning on/off the power or ❷ cover it with your hands or do ending a call ❾■...
  • Page 7 � Call/Charging indicator � 1Seg antenna Lights/fl ickers while you are receiving a For receiving 1Seg broadcasting � call or message, talking, or charging. � � Private window � � � Outside camera � For shooting portraits and/or landscapes � �...
  • Page 8 Styles The P-01B comes with two styles. ■ Normal Style You can open the FOMA terminal easily by one-push key operation. ( One-push Open) ⿠You can open it also manually without using the button. ⿠You need to close the FOMA terminal manually. If it does not close, open it fully and then close it.
  • Page 9 Precautions ALWAYS FOLLOW THESE DIRECTIONS ■ Before using the FOMA terminal, read these safety precautions ■The following symbols show specifi c directions: carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. Denotes things not to do.
  • Page 10 General precautions for FOMA the batteries and adapters gas station where fl ammable gas terminal, batteries, adapters, specifi ed by NTT DOCOMO, INC. is generated, turn off the FOMA and UIM If you use any type of battery or adapter terminal, and never do charging.
  • Page 11 Do not store in humid or dusty Do not allow liquids such as Precautions for FOMA terminal places, or in high temperature water, or foreign materials such environments. as metal pieces or flammable Warning Don’t Don’t materials to get into the UIM or Malfunction may result.
  • Page 12 When talking with the FOMA Turn off the FOMA terminal Caution terminal set to Hands-free, be when near electronic devices sure to keep the FOMA terminal using high-precision control or away from your ear. weak signals. Do not swing the FOMA Further, when you play games The FOMA terminal may possibly cause terminal by its antenna or strap.
  • Page 13 When a metallic strap is Do not use the FOMA terminal Itching, rash or eczema may attached to your FOMA terminal, with the hook for Horizontal be caused depending on be careful that it does not hit Open Style protruded. your physical conditions or Don’t Don’t...
  • Page 14 Warning the battery terminals. Also do such as a docomo Shop or dispose of it Don’t not carry or store the battery in accordance with local waste disposal together with any metal objects regulations.
  • Page 15 If the battery fluid comes in Never short-circuit the charging Use the adapter at the specified contact with skin or clothes, terminal when the adapter is V AC. immediately stop using, then plugged into the power outlet If you use it at a wrong voltage, fire or Don’t malfunction may result.
  • Page 16 When removing the adapter out Turn off the FOMA terminal in Notes on using near electronic of the outlet or cigarette lighter crowded areas such as inside medical equipment socket, do not forcibly pull the trains during rush hour, as adapter cord or power cord, ■The description below meets someone with an implanted...
  • Page 17 Handling Precautions ■Occasionally clean the terminals of the ■The FOMA terminal, if operated near land- General notes equipment using a dry cotton swab, etc. line phones, television sets, radios or other ■Do not wet the equipment. devices that are in use, may affect them. The soiled terminals deteriorate the connection You should operate your FOMA terminal as The FOMA terminal, battery, adapter, and...
  • Page 18 UIMs to a handling counter Strong magnetic items might cause in erroneous ■Charge the battery where: such as a docomo Shop. operation. ⿠ There is very little humidity, vibration, and dust. ■Avoid using in extremely high or low ⿠...
  • Page 19 Dial-up Communication, Object Push, and mobile phone in your hand while driving. If you 3. For further details, contact “docomo Serial Port. With Audio, you might be able answer a call out of necessity, tell the caller with Information Center”...

  • Page 20: Before Using

    You cannot use the FOMA terminal for ⿠You cannot use the UIM (blue) on your FOMA communications such as voice/videophone calls, i-mode, or sending/receiving mail, terminal. If you have that blue one, have it replaced at unless the UIM is inserted. a docomo Shop.
  • Page 21 Charging Plug the connector of the AC Adapter (option) horizontally Plug the connector of the AC Adapter (option) horizontally Call/Charging indicator with its engraved side facing down into the connector with its engraved side facing down into the connector terminal of the Desktop Holder (option). Lock claw Pull out the AC Adapter’s plug, and plug it into a Pull out the AC Adapter’s plug, and plug it into a...

  • Page 22: Turning Power On

    Turning Power ON Confi guring Initial Setting h for at The Initial Setting display appears when you turn on Press and hold the power for the fi rst time. least one second. Set the date and time. Set the date and time. After the Wake-up display is displayed, the Stand-by display You can set the date and time.

  • Page 23: Checking Your Own Phone Number

    Checking Your Own Phone Number Switching to English Display m from the Stand-by m from the Stand-by display 設定／サービス (Set./Service) ▶ ▶ display display Phonebook ディスプレイ (Display) ▶ ▶ Own number バイリンガル ( Select language) ▶ o to switch the You can press tabs.

  • Page 24: Screen Explanation

    Screen Explanation Viewing Display/Icon Battery level (estimate) Status icon ········ Vibrator is set. Full ········ Ring Volume is set to ⿠When is shown, charge the battery. “Silent”. ⿠Depending on the usage ········ In Manner Mode state, the battery level indication ····...
  • Page 25 Private Window Notifi cation icon ········ Missed call When you close the FOMA terminal, the Stand-by display appears on the Private window. While you are ········· Record message talking, making or receiving a call, or when you press ········· Videophone record a side key with the FOMA terminal closed, information message appears on the Private window.
  • Page 26 ■Command navigation key Navigation Displays and Key Operations ■Key Operations in Normal Style ⿠Moves the cursor or ⿠Moves the cursor to the Key operations you can do while you are operating highlighted display up. right. a function are shown at the bottom of the display. ⿠Scrolls forward page (Hold down to scroll (Navigation displays)
  • Page 27 ■Key Operations in Horizontal Open Style Difference in key operations Key operations you can do are shown the same way Key assignments differ between Normal Style and as in Normal Style at the bottom of the display. Horizontal Open Style. Follow and operate respective ⿠While the vertical display is shown, you can operate the Navigation displays.

  • Page 28: Menu Operation

    ■Horizontal Open Menu Menu Operation m from the horizontal Stand-by display to ■Main Menu Press open Horizontal Open Menu that enables you to m from the Stand-by display to show Main Menu. Press quickly access the functions that are available to the horizontal display.
  • Page 29 Function menu Functions start to work by simple operation When “ ” is displayed at the lower right of the You can either start a function by selecting a menu display, you can use functions such as Store, Edit, and item on the menu or can start it by simple key Delete by pressing operation in the Stand-by display or with the FOMA...
  • Page 30 Using Touchpad o or o , for moving the cursor or scrolling the display. You can use the Touchpad, in stead of pressing t to switch between ON/OFF of the Touchpad. When switched to ON, the Touchpad lamp lights in blue. Press ⿠You can also use the Touchpad in Horizontal Open Style.
  • Page 31 Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages. Switch between input modes. Switch between input modes. Convert/fi x characters. Each time you press Each time you press o to specify the area 1.
  • Page 32 <Example> Entering “タダの菓子” in a text memo. m from the Stand-by o to move the ▶ display display Stationery cursor onto “の”. cursor onto “ ▶ Text memo ▶ Select <Not recorded>. o to move the Enter hiragana characters Enter hiragana characters in Kanji/Hiragana input in Kanji/Hiragana input cursor onto the candidate...

  • Page 33: Adjusting Ring Volume

    Sound/Screen Setting Adjusting Ring Volume <Example> Adjusting the ring volume for incoming Changing Ring Tone voice calls m from the Stand-by display <Example> Changing the ring tone for incoming voice ▶ ▶ ▶ Set./Service Sound Ring volume calls m from the Stand-by display Select “Phone”.
  • Page 34 Using Manner Mode Setting Keypad Sound OFF Just by pressing a key, you can make a tone from the You can silence a Keypad sound for when you press a FOMA terminal such as a ring tone, keypad sound, key. and alarm sound silence.

  • Page 35: View Blind

    ■ ■ Backlight View Blind You can set Backlight to OFF. Then the display dims, You can make the display hard to see from people around. and the keys turn off. 8 for Press and hold 5 for Press and hold at least one second from at least one second from the Stand-by display.

  • Page 36: Kisekae Tool

    ■ Font Size Setting Kisekae Tool You can change font sizes at a time. You can set the ring tone, Stand-by display, menu m from the Stand-by display icons and others at a time. ▶ ▶ Set./Service Display m from the Stand-by display ▶...

  • Page 37: Checking Missed Calls And New Mail

    Changing Illumination Checking Missed Calls and New Mail by Tone and Call/Charging Indicator You can select a pattern of the illumination for incoming calls or messages, or talking at a time. With the FOMA terminal closed, you can check for m from the Stand-by display missed calls, new mail and others.
  • Page 38 This is a four-digit numbers required for your identifi cation you have selected just in case you forget them. when you place an order for at a docomo Shop, docomo ⿠Take care not to let others know your security codes.
  • Page 39 ■ ■ PIN1 Code/ PIN2 Code PUK (PIN Unblock Code) “0000” at the time of your contract The PIN1 code is a four- to eight-digit numbers for The PUK (PIN unblock code) is the eight-digit checking the user each time the UIM is inserted into numbers for releasing the PIN1 code and PIN2 the FOMA terminal or each time the FOMA terminal is code locks.

  • Page 40: Various Lock Functions

    Business hours: 24 hours ⿠If you select “Accept”, you can set a ring tone for ※You can set/release also from the My incoming calls without caller IDs. docomo site via your personal computer or ■ Reject Unknown other devices. (In Japanese only) ⿠For details on Omakase Lock, refer to...

  • Page 41: Reset Settings

    Stand-by display From personal computers ▶ ▶ Set./Service Other settings http://www.docomo.biz (in Japanese only) ※You may not be able to access due to system ▶ Reset settings maintenance, etc. Enter your Terminal Security Code Enter your Terminal Security Code ■When Remote Reset starts...

  • Page 42: Call Telephone

    ■ Making a Call from Phonebooks Call Telephone <Example> Search a Phonebook entry by the name Making a Call/Videophone Call stored in Phonebook o from the Stand-by display. Press Press From the Stand-by display, enter a From the Stand-by display, enter a phone number starting with a city code.
  • Page 43 You can use WORLD CALL when you want to make an international call from Japan. Calls) from the Stand-by display. Calls) from the Stand-by display. ⿠Contact “docomo Information Center” on the back page of this manual for inquiries about WORLD CALL. Select a call record. Select a call record.

  • Page 44: Receiving A Call/Videophone Call

    Receiving a Call/Videophone Call When You can not Answer a Call ■ Public Mode (Drive Mode) A call comes in. A call comes in. Once you activate Public mode (Drive mode), the The ring tone sounds and the Call/Charging indicator The ring tone sounds and the Call/Charging indicator guidance is played back telling that you cannot fl ickers.

  • Page 45: Record Message

    ■ ■ Public Mode (Power Off) Record Message Once you activate Public mode (Power off), the By activating Record Message, you can record a guidance is played back for an incoming call while the caller’s voice/video message when you cannot answer power is off, telling that you cannot answer the call as the call.
  • Page 46 ⿠The network services are not available when you are out of the service area or out of reach of radio waves. ⿠For details, refer to “Mobile Phone User’s Guide [Network Services]”. ⿠For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual. Service...

  • Page 47: Call Forwarding Service

    ■ ■ Voice Mail Service Call Waiting Service m from the Stand-by display m from the Stand-by display ▶ ▶ ▶ ▶ Set./Service NW services Set./Service NW services ▶ ▶ Voice mail Call waiting Activate the service Activate the service ▶...

  • Page 48: Services Available For Foma Terminal

    Services Available for FOMA Terminal Available services Phone number Available services Phone number Directory assistance service Emergency calls to police (No prefix) 110 (Charges apply: guidance fee + call fee) (No prefix) 104 Emergency calls to fire station and (No prefix) 119 ※Listed phone numbers only are supported.

  • Page 49: Available Services Overseas

    “Mobile Phone User’s Guide [International Services]” an i-Widget display, multiple Widget Appli programs might start. or the DOCOMO International Services website. In that case, you are charged a packet communication fee for ⿠A fee charged for overseas use (call fee, packet each communication.
  • Page 50 ■Make a Call to Outside the Country Mail You Stay at (Including Japan) Sending i-mode Mail 0 (for at least one second) from the ▶ Stand-by display Stand-by display Enter numbers in Once you subscribe to i-mode, you can exchange e-mail order of country/area code→area code messages over the Internet.
  • Page 51 Creating and Sending Deco-mail Creating and Sending Decome-Anime You can compose a Deco-mail message by using a Decome-Anime is an i-mode mail service that enables template. you to create expressive messages having Flash movies with messages and images. You can create l from the Stand-by display them easily by using Decome-Anime templates.
  • Page 52 ■ Check New Messages Displaying Received i-mode Mail You can check the i-mode Center for a new mail l from the Stand-by display Press Press message or Message R/F. ▶ Inbox l for Press and hold at least one second from Select a folder.

  • Page 53: Using Sms

    Receiving Early Warning “ Area Mail” Using SMS You can receive information such as about earthquake You can send a text message to the phone number of alerts that are issued from the Japan Meteorological the FOMA terminal at the other end. Agency as an Area Mail message.
  • Page 54 ■Displaying Received SMS Message Phonebook l from the Stand-by display Press Press Storing Phonebook Entries ▶ Inbox o for at least one Press and hold Press and hold Select a folder. Select a folder. second. second. Select “Phone”. Select “Phone”. Select an SMS message.

  • Page 55: Editing Phonebook Entries

    ■Storing Phonbook Entries from Editing Phonebook Entries Received Call Record o from the Stand-by display o from the Stand-by display ▶ Search and select a Phonebook entry. Highlight a received call record to be Highlight a received call record to be ▶...

  • Page 56: I-Mode/Full Browser

    i-mode/Full Browser ■Before Using i-mode ⿠Content of sites or websites is in general protected Accessing i-mode Sites by copyrights law. You can use data such as text and images for your entertainment, which you download i-mode is a service that enables you, by using the to your i-mode phone, but you cannot use them, part display of the FOMA terminal supporting i-mode or whole of it as is, or modify them for the purpose of...

  • Page 57: Viewing And Operating Sites

    Displaying Websites Designed for Viewing and Operating Sites Operations on site viewing display Scroll display/Move highlighted/ You can browse Internet websites designed for PCs Move the pointer: + using the Full Browser function. ⿠Note that you are charged a high communication fee Select an item (link): for the massive data communication such as browsing Return to previous page:...
  • Page 58 ■Switch from i-mode to Full Browser ■ Saving Websites or Sites for Quick Access You can switch to Full Browser to show the Internet Bookmark websites or i-mode sites you frequently websites incorrectly displayed by i-mode. ⿠With Full Browser, note that the billing system differs visit to get easy access to them.
  • Page 59 Stand-by display by tickers. You can read it on the i-Channel list by pressing the i-Channel key. Further, two types of channels, “Basic channel” provided by DOCOMO and “Favorite channel” provided by IPs (Information Providers) are available. You are not charged a packet communication fee for auto-updates of “Basic channel”...
  • Page 60 Map/ GPS Checking Your Location You can position your current location and display Map/GPS Function location information. You can send your location information by mail and display a map as well. m from the Stand-by display ⿠GPS is operated by the United States Department of ▶...
  • Page 61 FOMA terminal ⿠When you start to use the AUTO-GPS function, check to DOCOMO. GPS service providers or the DOCOMO website for ⿠To use i-concier or respective services, you need to how you can use services. It might happen that you will separately subscribe for and establish the settings.

  • Page 62: Camera

    Camera Viewing and Operating Finder Display Photo mode Flash setting : intelligent Auto : Auto : Forced ON : Normal : Always light ON : Forced OFF Photo light set. ⿠You can also use “Scene” that selects a mode suitable for the scenery around. : ON : OFF Key guidance...
  • Page 63 Shooting Still Images/Moving Pictures Viewing Still Images/Moving Pictures After Shooting ■Shoot Still Images c from the Stand-by display. Press Press The still image you shot is saved to the “My picture” in Data Box. The shot moving picture is saved to the “...

  • Page 64: 1Seg

    1Seg ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving audio and video. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).

  • Page 65: Setting Channels

    Setting Channels Watching 1Seg When you activate 1Seg for the fi rst time or change c for Press and hold the area you are in, you need to operate “Channel at least one second from setting”. Select “Auto channel setting” to enable you the Stand-by display.
  • Page 66 Viewing and Operating Viewer Display Setting Timer for Watching or Recording 1Seg Programs Displayed while you are watching a Set the date and time, a channel, and program name, and 1Seg program enter them to the TV Timer List or Timer Recording List. Program Video Information (outline)
  • Page 67 Music Setting/Playing Programs ■Setting Programs Music&Video Channel ▶ m from the Stand-by display MUSIC ▶ ▶ Music&Video Channel Set program Music&Video Channel is a service which automatically delivers up to about one-hour programs at night just by selecting your favorite music programs in advance. Follow the instructions on the display Follow the instructions on the display Further, you can enjoy high-quality video program of up...

  • Page 68: Playing Music Files

    Downloading Music Files from Playing Music Files Sites ® MUSIC Player enables you to play Chaku-uta Full music fi les you downloaded from sites, or to use your personal ® You can download Chaku-uta Full music fi les from computer to play music fi les saved on the microSD card. sites.
  • Page 69 ■Starting i-αppli i- α ppli i for at least one Press and hold Press and hold i-αppli/ i-Widget second from the Stand-by display. second from the Stand-by display. Select a software Select a software ■i-αppli “i-αppli” is a software program for i-mode mobile phones. By program.
  • Page 70 i-motion/ Movie ⿠You can delete the pre-installed i-αppli programs except for the “ ケータイTOOL＜辞書＞ (KEITAI TOOL Dictionary)”. You can re-download deleted programs Playing i-motion/Movie from the “P-SQUARE” site. You can download not only i-motion is a fi le consisting from video, audio, and i-αppli programs but also the music which you can download to your FOMA pre-installed Chara-den images,...

  • Page 71: Osaifu-Keitai

    Osaifu-Keitai Osaifu-Keitai/ ToruCa As Osaifu-Keitai comes with the IC card, you can make a payment just by placing the FOMA terminal over a scanning device in shops. Further, you can use communications to deposit electronic money or to check your account for balance or usage histories.
  • Page 72 i-concier “i-concier” works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Schedule, ToruCa, Phonebook, etc.) and sends you information, with good timing, about a variety of things according to your living area, your current location, or your preference or interest. Also this service automatically updates schedule events or ToruCa fi les to the latest ones, and automatically adds useful information such as about the opening period of various shops to your Phonebook.
  • Page 73 ■Receive Information Convenient Tools When information arrives, When information arrives, Using Schedule “ “ ” blinks and the content is displayed on m from the Stand-by the Stand-by display. ▶ display display Stationery ▶ Schedule Select a date to show a schedule event of the selected date.

  • Page 74: Using Alarm

    ⿠The alarm does not sound in Public mode (Drive and horizontal directions. ⿠“株式会社NTT ドコモ (NTT DOCOMO, mode), Lock All, Personal Data Lock, or Omakase Lock. INC.)” is displayed when you scan the QR...

  • Page 75: Using Pedometer

    ■Scan a Code Using Pedometer <Example> Access P-SQUARE by using As you walk with your FOMA terminal in hand or QR code on the right in your pocket, your pace is measured, and then depending on the measured results, your distance, QR code for calories consumed, and body fat burned are displayed.

  • Page 76: Using Microsd Card

    If you do not have a microSD card, you have to purchase ⿠Push it until it clicks. ⿠P-01B supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of October 2009).
  • Page 77 When you use the microSD card for the fi rst time, you need to format (initialize) it. ⿠Be sure to use P-01B for formatting. The microSD card formatted using other devices such as personal : A microSD card is inserted.
  • Page 78 ■ ■ Back up Data to the microSD Card Copying Data to the microSD card <Example> Copying a still image You can back up Phonebook entries, schedule events, ToDo items, messages, text memos, and m from the Stand-by display bookmarks, and the settings on and information ▶...

  • Page 79: Bluetooth Function

    Bluetooth Function You can connect your FOMA terminal to a Bluetooth device such as Wireless Earphone Set 02 (option), and can talk on the phone or play music fi les. ■Register a Bluetooth Device to the ■Connect the Bluetooth Device FOMA Terminal ▶...

  • Page 80: Send Data

    ■Send Data Sending/Receiving Data by Infrared Communication Function menu of the data to be sent Function menu of the data to be sent ▶ Send Ir data The FOMA terminal conforms to IrMC™ version 1.1 ⿠Procedure for sending data might differ depending standard.
  • Page 81 ■Send Data Sending/Receiving Data by iC Communication Function menu of the data to be sent Function menu of the data to be sent ▶ transmission iC communication is a function that enables you to ⿠Procedure for sending data might differ send/receive data such as Phonebook entries to/ depending on the data.

  • Page 82: Support

    …When you use the desktop holder, make sure the connector specifi ed by DOCOMO. terminal of the FOMA terminal is not stained. If it is stained, wipe the terminal part with a dry cotton swab, etc.
  • Page 83 The usable time of the battery is short. Cannot talk. …Make sure not to leave the FOMA terminal out-of-service-area for (“ ” does not disappear even if you move to another place. You cannot make or receive a call, though the radio wave a long time.
  • Page 84 ・ The cost for troubles caused by the use of devices and technical standard, it might happen that we at DOCOMO reject to consumables other than those specified by DOCOMO is charged repair the malfunction.
  • Page 85 ⿠The information such as about function settings and Total i-mode Fault Diagnosis Site Calls Duration, etc. might be reset depending on the troubles or repairs, or the way you handle the FOMA terminal. Set the You can check on your FOMA terminal whether settings again.

  • Page 86: Updating Software

    ⿠When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.) is automatically sent to the server (DOCOMO-managed server for Software Update). We at DOCOMO never use the sent information for purposes other than to update software programs.
  • Page 87 ■ ■Start Software Update from Menu Start Software Update from Icon m from the Stand-by display Select “Update notifi cation icon” on the Select “Update notifi cation icon” on the Stand-by display. Stand-by display. ▶ ▶ Set./Service Other settings ▶ Software update Enter your Terminal Enter your Terminal...
  • Page 88 FOMA terminal, or when no virus pattern data supporting them is found, this function is disabled to prevent troubles from occurring. ⿠The virus pattern data installed on the FOMA terminal differs in content by every model. Note that we at DOCOMO might stop to distribute the virus pattern data for models on market for last three years since their release.

  • Page 89: Introduction Of Options And Related Devices

    Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.

  • Page 90: Mail

    Appendix Attachment preference Auto-start attachment Address/Spam Mail set. Function List Mail settings Feel＊Mail Auto save setting Execute “Reset settings” on page 39 for the items Check settings indicated by , to return to the respective defaults. SMS report request Inbox SMS validity period SMS settings Outbox...
  • Page 91 Common settings Select ring tone ( i-mode settings Check settings Ring volume ( Keypad sound ( Reset i-mode setting Full Browser Home Sound Melody effect ( Headset usage setting ( Software list (phone) Mail/Msg. ring time ( Software list i αppli (microSD) Charge sound i αppli data Display setting (...

  • Page 92: Lock/Security

    MUSIC illumination Answer setting ( Bluetooth illumination Setting when opened Illumination IC card illumination Record display set Check settings Disp. PH-book image Kisekae Set call/receive No. Incoming call i-concier Information disp. set. Ring time ( Self mode Info notice setting ( Lock all V.phone while packet Personal data lock...
  • Page 93 English guidance NW services Overseas NW search Machi-chara Overseas setting Chara-den Image Overseas service Additional service 1Seg Video Contact DOCOMO Position memory OFFICEED Document viewer Font Chaku-moji Work with style SD other fi les Touchpad setting Scan code Bar code reader...

  • Page 94: Phonebook

    Device list Phone Add to phonebook Register New Devices Reading? Activate Bluetooth/Bluetooth power OFF Bluetooth Accept registered Group? Accept dialup devices Memory No.? Bluetooth settings Search phonebook Name? Phone number? imadoco search Mail address? imadoco kantan search 2-touch dial? Copy i-area UIM operation Map/GPS αppli...
  • Page 95 Alarm ( Reset channel setting Schedule ( Reset storage area User settings ToDo ( Reset TV settings Text memo ( Check TV settings Calculator ( IC card content Dictionary DCMX Common phrases ToruCa Phrase/own dict. Own dictionary IC card lock IC card lock set.

  • Page 96: Main Specifications

    ■Handset device Size Inside camera : 1/10.0 inches Outside camera : 1/3.2 inches Model P-01B Camera Number of Inside camera : Approx. 330,000 pixels Dimensions (when closed) Height: Approx. 111 mm effective pixels Outside camera : Approx. 8,100,000 pixels Width: Approx. 50 mm Number of recording Inside camera : Approx.
  • Page 97 ■Battery pack ■Recordable time of 1Seg Name of product Maximum (total) recordable Battery Pack P20 Approx. 5,120 minutes Battery type time to the microSDHC card (16 Li-ion (lithium ion) battery Voltage 3.7 V Gbytes) Capacity 800 mAh ⿠The maximum recordable time is the estimate for 224 kbps of video, 48 kbps of audio, and 52 kbps of data (including captions).

  • Page 98: Sar Certification Information

    ■SAR Certification Information TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO: http://www.nttdocomo.co.jp/english/product/sar/ This model phone P-01B meets the MIC’s* technical regulation for Panasonic Mobile Communications Co., Ltd.: http://panasonic.jp/mobile/ exposure to radio waves. (In Japanese only) The technical regulation established permitted levels of radio...

  • Page 99: Declaration Of Conformity

    Conformity can be found on http://panasonic.net/pmc/support/index.html. permitted levels of RF energy for the general population. The guidelines are based ※The European RTTE approval of this product is limited to the use of the P-01B on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.

  • Page 100: Important Safety Information

    ■Important Safety Information Export Administration Regulations AIRCRAFT This product and its accessories might be covered by the Japan Switch off your wireless device when boarding an aircraft or whenever you are Export Administration Regulations (“Foreign Exchange and Foreign instructed to do so by airline staff. If your device offers a ‘flight mode’ or similar feature consult airline staff as to whether it can be used on board.

  • Page 101: Intellectual Property Right

    “WORLD CALL”, “Dual Network”, “i-Channel”, “DCMX”, “Security Scan”, “i-area”, or other countries. “WORLD WING”, “Public mode”, “OFFICEED”, “2in1”, “docomo PRIME series”, and the logos of “FOMA”, “i-mode”, “i-αppli”, “iC”, and “Music&Video Channel” are ⿠Other company names and product names described in the text are trademarks or trademarks or registered trademarks of NTT DOCOMO, INC.
  • Page 102 Bluetooth SIG, Inc. and any use (“Secure Content”) so that their intellectual property, including copyright, in such of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade content is not misappropriated. This device uses WM-DRM Software to play names are those of their respective owners.

  • Page 103: Index

    Index Call setting without ID ....38 Display setting ......32 Call waiting ........45 AC adapter ........19 Camera ......... 61 After-sales services ..... 82 Early warning “Area Mail” ... 51 Shooting still images/moving Alarm ..........72 Earphone ........4 pictures ........
  • Page 104 International calls ......41 Format ........75 International roaming ....47 Inserting/removing ..... 74 Holding ......... 40 Internet access ......54 Movie ..........68 Horizontal open lever ....4 i-Widget ........67 MUSIC Player ....... 66 Horizontal open menu ....26 MUSIC Player display ....
  • Page 105 Phonebook Reject unknown ......38 Timer recording ......64 Add to phonebook ...... 52 Remote reset ........ 39 ToruCa .......... 69 Reset settings ......39 Touchpad ........4, 28 Delete data ......... 53 Ring volume ......... 31 Trademarks ........99 Edit phonebook ......53 Search phonebook .....
  • Page 106 My docomo (http://www.mydocomo.com/) ⿠You will need your “network ID” for the access from i-mode. ⿠If you do not have or you have forgotten your “network ID” or “docomo ID/password”, ⿠No packet communication charges are incurred for the access from i-mode.
  • Page 107 * Available from mobile phones and PHSs. ●Please confi rm the phone number before you dial. ●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site.
  • Page 108 Installing DOCOMO Connection Manager........

  • Page 109: Data Communication Available From Foma Terminal

    FOMA terminal to an access point which does not support HIGH-SPEED or the terminal is outside the FOMA High-Speed Area, or when you use the device which does not support High-Speed such as DOCOMO’s PDA “sigmarion Ⅲ”. ≥The packet communication is charged according to the amount of data you sent and received. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data files.

  • Page 110: Before Using Data Communication

    ≥The FOMA terminal does not support Remote Wakeup. ≥The FOMA terminal does not support the FAX communication. ≥You can perform data communications by connecting the FOMA terminal with DOCOMO’s PDA “sigmarion Ⅲ”. Before Using Data Communication Charge of Internet service provider To use the Internet, you need to pay the charge for the Internet service provider you use.

  • Page 111: Operating Environment

    Hard disk space size ≥Unused memory space of 35 Mbytes or more for “DOCOMO Connection Manager” ≥For the latest information about the operating environment, refer to the DOCOMO website. ≥The operation on the upgraded OS is not guaranteed. ≥The memory requirements and hard disk space size may vary depending on the system environment.
  • Page 112 Connect FOMA Terminal to Other Devices The following three ways are available for connecting the FOMA terminal to another device: Use FOMA USB Cable with Charge Function 01/02 Connect the FOMA terminal to a personal computer provided with the USB port using the FOMA USB Cable with Charge Function 01/02 (option).

  • Page 113: Setup Flow For Data Transfer (Obex™ Communication)

    Charge Function 01/02, install the “FOMA communication configuration file” (driver) from the provided “P-01B CD-ROM” onto the personal computer. You are advised to install “DOCOMO Connection Manager” which enables you to easily set up the APN or dial-up for communication.
  • Page 114 Connecting PC and the FOMA Terminal The following steps explain how to connect the FOMA USB Cable with Charge Function 01/02 (option). Check the direction of the Connector terminal connector terminal of the FOMA External connector terminal, then straight insert the (Face up the engraved external connector of the FOMA FOMA...

  • Page 115: Installing Foma Communication Configuration File (Driver)

    Close the “P-01B CD-ROM” display. ≥This display automatically appears when you set “P-01B CD-ROM” into your personal computer. It may not appear depending on the settings of your personal computer. In that case, go to step 4. ≥If this display appears during installation of the “FOMA communication configuration file” (driver), close the display.
  • Page 116 Close the “P-01B CD-ROM” display. ≥This display automatically appears when you set “P-01B CD-ROM” into your personal computer. It may not appear depending on the settings of your personal computer. In that case, go to step 4. ≥If this display appears during installation of the “FOMA communication configuration file” (driver), close the display.
  • Page 117 Close the “P-01B CD-ROM” display. ≥This display automatically appears when you set “P-01B CD-ROM” into your personal computer. It may not appear depending on the settings of your personal computer. In that case, go to step 4. ≥If this display appears during installation of the “FOMA communication configuration file” (driver), close the display.
  • Page 118 Confirm Installed FOMA Communication Configuration File (Driver) Confirm that the “FOMA communication configuration file” (driver) is installed correctly. “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Open “システムとメンテナンス (System and maintenance)” <For Windows XP> “スタート (Start)”→Open “コントロールパネル (Control panel)” →“パフォーマンスとメンテナンス (Performance and maintenance)”→Open “システム (System)”. <For Windows 2000>...

  • Page 119: Preparing Bluetooth Communication

    “FOMA communication configuration file” (driver), the “FOMA communication configuration file” (driver) may not be installed correctly. In that case, execute “P01B_un.exe” on “P-01B CD-ROM” to delete the “FOMA communication ※ configuration file” (driver), and then install the files again.
  • Page 120 When the display for connection request appears, select “YES”. Select the text box for a Bluetooth pass key 1Enter the Bluetooth pass key1Set ≥You can enter 1 through 16 half-pitch alphanumeric characters for the Bluetooth pass key. ≥Enter the same Bluetooth pass key for both the FOMA terminal and personal computer. The personal computer is registered and a wireless connection starts.

  • Page 121: Docomo Connection Manager

    The Dial-up Communication service is closed. DOCOMO Connection Manager “DOCOMO Connection Manager” is a convenient software program to perform flat-rate data communication and volume charging data communication. It enables you to sign up for “mopera U” and easily make PC settings according to your contract situation.

  • Page 122: Before Installing Docomo Connection Manager

    FOMA USB Cable (option). Check the service contents and the contract contents with Internet service provider. When a connection software program other than “DOCOMO Connection Manager” is installed, set it not to start automatically. ≥See page 19 for using communication software other than “DOCOMO Connection Manager”.

  • Page 123: Installing Docomo Connection Manager

    When MSXML6 and Wireless LAN API are not installed on the Windows XP environment, you need to install them before installing “DOCOMO Connection Manager”. When a confirmation display appears, click “Install” and install MSXML6/Wireless LAN API. When you restart Windows after installation of MSXML6/Wireless LAN API is completed, installation of “DOCOMO Connection Manager” automatically starts.
  • Page 124 Click “次へ (Next)”. Confirm the display precautions and click “次へ (Next)”. Confirm the licensing contract contents. If you agree with the contents, select “使用許諾契約の条 項に同意します (Agree with the licensing contract contents)” and click “次へ (Next)”. Confirm the installation destination folder, then click “次へ...
  • Page 125 Click “インストール (Install)”. Installation starts. Click “完了 (Finish)”. Installation is completed.

  • Page 126: Starting Docomo Connection Manager

    When this is the first start-up, the setting wizard appears automatically. Hereafter, proceed operation/settings following the instruction of software to complete the preparation to access the Internet. For details, refer to “ドコモ コネクションマネージャ操作マニュアル.pdf (DOCOMO Connection Manager operation manual by PDF format)”.

  • Page 127: Setting Dial-Up Network

    (driver). The confirmation method varies depending on the operating system of your personal computer. ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN); therefore, you do not need to confirm the modem.
  • Page 128 Open the “モデム (Modem)” tab, confirm the COM port number in the “接続先 (Access point)” field of “FOMA P01B”, then click “OK”. ≥When connecting wirelessly using Bluetooth communication, confirm the COM port number of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker in the “接続先...
  • Page 129 Open the “モデム (Modem)” tab, confirm the COM port number in the “接続先 (Access point)” field of “FOMA P01B”, then click “OK”. ≥When connecting wirelessly using Bluetooth communication, confirm the COM port number of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker in the “接続先...
  • Page 130 Select a connection method. <When you can select the COM port number of “FOMA P01B”> Select the COM port number with which you install the “FOMA P01B” in the “接続方法 (Connection method)” field, then click “OK”. Then, go to step 6. ≥Here, “COM3”...
  • Page 131 Confirm that “OK” appears on the display. “ファイル (File)” menu1Select “ハイパーターミナルの終了 (Exit Hyper Terminal)” to exit Hyper Terminal. ≥If the message “現在、接続されています。切断してもよろしいですか? (Currently connected. Do you want to disconnect this line?”) appears, select “はい (Yes)”. ≥The message “セッションXXXを保存しますか? (Do you want to save session XXX?)” then appears. You do not need to especially save that session.
  • Page 132 Confirm that “OK” appears on the display. Information ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”. ≥If the entered AT command is not displayed, enter “ATE1 ”. ■Specifying “caller ID notified/not notified” in dial-up network Also by dial-up network setting (see page 25), you can add “186 (notify)”...
  • Page 133 Set Dial-up Network for Windows Vista “ [スタート (Start)]”1“接続先 (Access point)”1Click “接続または ネットワークをセットアップします (Setup the connection or network)”. Select “ダイヤルアップ接続を セットアップします (Setup the dial-up connection)”, then click “次へ (Next)”. If the display for selecting a modem appears, click “FOMA P01B”. ≥When connecting wirelessly using Bluetooth communication, put a check mark for only the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker.
  • Page 134 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P01B” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...
  • Page 135 Set Dial-up Network for Windows XP “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “新しい接続ウィザード (New connection wizard)”. When the “新しい接続ウィザード (New connection wizard)” display appears, click “次へ (Next)”. Select “インターネットに接続する (Connect to the Internet)”, then click “次へ (Next)”. Select “接続を手動でセットアップする (Manually set up the connection)”, then click “次へ...
  • Page 136 Enter an access point number in the “電話番号 (Phone number)” field, then click “次へ (Next)”. ≥When connecting to “mopera U”, enter “¢99¢¢¢3#” as the access point number. See page 23 for access point numbers other than “mopera U”. Enter the user name and password supplied from your Internet service provider or network administrator in the...
  • Page 137 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P01B” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...

  • Page 138: Network Connection

    Set Dial-up Network for Windows 2000 “スタート (Start)”1“プログラム (Programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)”1Open “ネッ トワークとダイヤルアップ接続 (Network and dial-up connections)”. Double-click “新しい接続の作成 (Create a new connection)” in “ネットワークとダイヤルアップ接続 (Network and dial-up connections)”. If the “所在地情報 (Address information)” display appears, enter “市外局 番 (City code)”, then click “OK”. ≥The “所在地情報...
  • Page 139 Confirm that “FOMA P01B” is displayed in the “インターネットへ の接続に使うモデムを選択する (Select a modem for connection to Internet)” field. Then click “次へ (Next)”. ≥If “FOMA P01B” is not selected in that field, select it. ≥When connecting wirelessly using Bluetooth communication, select the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker.
  • Page 140 Specify IP address and DNS (domain name service) address. Enter “IPアドレス (IP address)” and “ISPによるDNS（ドメイ ンネームサービス）アドレスの自動割り当て [Automatically allocate a DNS (domain name service) address by ISP]” according to the information supplied from your Internet service provider or network administrator. After you finish entering all the items, click “OK”. The display in step 10 returns;...
  • Page 141 “スタート (Start)”1“プログラム (Programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)”1 Open “ネッ トワークとダイヤルアップ接続 (Network and dial-up connections)”. Select the icon of the access point name you entered in step 15, then select “ファイル (File)” menu 1“プロパティ (Properties)”. Click the “全般 (General)” tab to confirm the setting contents. ≥When two or more modems are connected to your personal computer, confirm that “モデム...

  • Page 142: Making Dial-Up Connection

    Making Dial-up Connection Making Dial-up Connection for Windows Vista Perform the operation on page 6 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “接続先 (Access point)”. Select access point and click “接続 (Connect)”. Confirm the contents and click “ダイヤル (Dial)”. ≥When connecting to “mopera U”...
  • Page 143 Making Dial-up Connection for Windows XP Perform the operation on page 6 to connect the FOMA terminal to your personal computer. “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “ネットワーク接続 (Network connection)”. Open the access point to be used. Select the access point icon of the ISP name (see page 27) you specified in “Set Dial-up Network”, then “ネットワークタ...

  • Page 144: Connecting And Disconnecting

    Your personal computer ･ Confirm whether your personal computer satisfies the operating environment (see page 3). cannot recognize “P-01B” ･ Confirm whether “FOMA communication configuration file” (driver) is installed in your personal computer. ･ Confirm whether the FOMA terminal is connected to your personal computer and powered on.

  • Page 145: At Command

    AT Command AT commands are used to specify and modify the functions of the FOMA terminal through the personal computer. ※The following abbreviations are used in the AT command list: [AT]: Commands which are available at the FOMA P01B Command Port. [M]: Commands which are available in the FOMA P01B (modem).

  • Page 146: At Command List

    AT Command List Command execution AT command Outline Parameter/Explanation example Re-executes the last executed − command. No carriage return is required. AT%V Displays the version of the AT%V − FOMA terminal. Ver1.00 AT&Cn Selects the operating conditions n=0: CD is always ON. AT&C1 of the circuit CD signal sent to n=1: CD varies according to the carrier of the other...
  • Page 147 Command execution AT command Outline Parameter/Explanation example AT¢DGPIR=n This command is valid at dialing/ n=0: Uses the APN as it is. (default) AT¢DGPIR=0 receiving calls. n=1: Adds “184” to the APN. (always not notify) In the dial-up network setting, n=2: Adds “186” to the APN. (always notify) AT¢DGPIR? you can add “186”...
  • Page 148 Command execution AT command Outline Parameter/Explanation example AT+CGREG=n Sets whether the network n=0: Not notified. (default) AT+CGREG=1 registration state is notified. n=1: Notified at switching between the inside and Displays whether you are inside outside of the service area. (set to “Notified”) or outside the service area (Inquiry) AT+CGREG?
  • Page 149 Command execution AT command Outline Parameter/Explanation example AT+COPS=n,2,m Selects the carrier to be n=0: Automatic (searches the network and switches the AT+COPS=1,2,"44F001" connected. network operator automatically) (default) n=1: Manual (connects to the network operator specified in “m”) n=2: Disconnects the connection to the network operator n=3: Mapping is not performed.
  • Page 150 AT+GMI Displays the manufacturer name AT+GMI − (Panasonic). Panasonic AT+GMM Displays the product name AT+GMM − (FOMA P-01B) of the FOMA FOMA P01B terminal. AT+GMR Displays the version of the AT+GMR − FOMA terminal. Ver1.00 AT+IFC=n,m Selects the flow control method. n: DCE by DTE...
  • Page 151 Command execution AT command Outline Parameter/Explanation example ATIn Displays the ID code. n=0: Displays “NTT DoCoMo”. ATI0 n=1: Displays the product name. (same as +GMM) NTT DoCoMo n=2: Displays the version of the FOMA terminal. (same as +GMR) ATI1 n=3: Displays ACMP information element.
  • Page 152 Command execution AT command Outline Parameter/Explanation example ATZn Resets the setting to the Only n=0 is specifiable. (Can be omitted) (In online) contents of the nonvolatile memory. If this command is NO CARRIER entered during communication, (In offline) the line is disconnected. AT¥Sn Displays the contents of the each Only n=0 is specifiable.
  • Page 153 ≥Command name: +CGEQMIN=[parameter] ･ Outline This command registers the reference value to judge whether the system permits QoS (Quality of service) reported from the network at establishment of the packet communication. You can specify four setting patterns described in the command execution example below. ･...

  • Page 154: Result Codes

    Disconnection Reason List ■64K Data Communication Value Reason The specified number does not exist. The line was normally disconnected. Cannot communicate because the other party is communicating. Dialed but no response has come in within the specified duration. Cannot communicate because the other party is dialing. The other party rejected to receive the call.
  • Page 155 For &E1 Numeric Character notation Connection speed notation CONNECT 1200 1,200bps CONNECT 2400 2,400bps CONNECT 4800 4,800bps CONNECT 7200 7,200bps CONNECT 9600 9,600bps CONNECT 14400 14,400bps CONNECT 19200 19,200bps CONNECT 38400 38,400bps CONNECT 57600 57,600bps CONNECT 115200 115,200bps CONNECT 230400 230,400bps CONNECT 460800 460,800bps...
  • Page 156 P-01B Kuten Code List...
  • Page 157 <How to read Kuten Code List> First enter the number for “Kuten digit 1 to 3”, and enter the number for “Kuten digit 4”. ≥Some characters in Kuten Code List may appear different on the display. Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit...
  • Page 158 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 讃 賛 酸 餐 斬 暫 残 【 た 】 函 箱 硲 箸 肇 筈 櫨 幡 肌 【...
  • Page 159 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 揚 揺 擁 曜 楊 様 洋 溶 熔 用 圷 圸 坎 圻 址 坏 坩 埀 垈 坡 椢...
  • Page 160 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 竊 竍 竏 竕 竓 站 竚 竝 竡 竢 誨 誡 誑 誥 誦 誚 誣 諄 諍 諂 鷯...

This manual is also suitable for:

Prime series

Table of Contents