Docomo P-01H Instruction Manual page 73

Inserting/Removing microSD Card
⿠The inserting slot of the microSD card is in the inside of the
back cover.
To insert it, remove the back cover, and then remove the
battery pack.
1
With the metal
terminal surface facing
downward, make sure
that the cut edge is
positioned at right and
then insert.
⿠Push it until it clicks.
When you remove the microSD card
Push the microSD card until it stops and remove it.
⿠Note that the microSD card may pop out when you insert
or remove it.
Icons on the Display
: A microSD card is inserted.
: Data is being read/written.
(Do not remove the microSD card nor turn off the
FOMA terminal.)
: The microSD card is write-protected.
: The microSD card cannot be used.
(Insert the microSD card again. If " " is still displayed,
execute "Check microSD" or "microSD format".)
Checking microSD Card
Check and repair a microSD card.
⿠Depending on the condition of the microSD card, correctly
repairing the card might not be possible, and data might be
deleted or the card might be initialized.
1
m ▶ ▶
Tool microSD
▶
Refer microSD data
▶
Check microSD
▶ m(
)
▶
YES
69