Docomo P-03C PRIME SERIES Instruction Manual
  1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. P-03C PRIME SERIES
  6. Instruction manual

Docomo P-03C PRIME SERIES Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-03C
'10.11
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-03C PRIME SERIES and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Docomo P-03C PRIME SERIES

Summary of Contents for Docomo P-03C PRIME SERIES

  • Page 1 P-03C ’10.11 INSTRUCTION MANUAL...
  • Page 2 DOCOMO W-CDMA ・ GSM/GPRS ・ Wireless LAN System Thank you for selecting the “docomo PRIME series P-03C”. Read this manual before use to correctly operate your P-03C. About manual of P-03C Basic Package The operating procedures for the P-03C are also published ⿠P-03C Handset...

  • Page 3: Table Of Contents

    Introduction FOMA Terminal ····································2 Precautions ··········································6 Contents What You can Do with P-03C ···············3 Handling Precautions ························14 P.1 ～ ▶ Part Names and Functions ··················4 Before Using ·····························18 Character Entry·························32 Lock/Security ····························39 Basic Charging, Power ON/OFF, etc. Various Security Codes, Operation Various Lock Functions, Screen Explanation ··················23...

  • Page 4: Foma Terminal

    SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifi ers shall be responsible for any such damage or loss.

  • Page 5: What You Can Do With

    1Seg has terminated. 「ひつじのしつじくん 」 ® such as about weather © NTT DOCOMO Start by Voice ▶ forecast, tour spots, and P.31 i-concier ▶ P.78 shops around you.

  • Page 6: Part Names And Functions

    Part Names and Functions ❾ ❶ Light sensor �cCamera key/1Seg key ❶ For sensing brightness (Do not cover it with your �ii-mode key/i-αppli key ❷ hands or do not put a sticker on it. Doing so might �hPower/End key disable detecting the brightness.) For turning on/off the power or ending a call ❷■...
  • Page 7 Flash <Side ▲ key    For turning up the earpiece volume during a call  f mark >Side ▼ key An IC card is installed. Use it for Osaifu-Keitai or iC communications. For turning down the earpiece volume during a Camera call For shooting portraits and/or landscapes...

  • Page 8: Precautions

    Precautions ALWAYS FOLLOW THESE DIRECTIONS ■ Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. Denotes not to touch with wet hands. After reading the precautions, keep them in a safe place. Not wet ■...
  • Page 9 General precautions for FOMA the batteries and adapters other places where fl ammable terminal, batteries, adapters, specifi ed by NTT DOCOMO, INC. gases are generated, be and UIM Fire, burns, injury or electric shock may absolutely sure to turn off result.
  • Page 10 Do not store in humid or dusty Do not turn on the flash toward Precautions for FOMA terminal places, or in high temperature car drivers. environments. It disturbs driving, and accidents may Warning Don’t Don’t result. Fire, burns or electric shock may result. Turn off the FOMA terminal in If the FOMA terminal and its Do not directly point the...
  • Page 11 For those with weak heart If the display part or camera The surface of the display is conditions, the vibrator and lens is broken, be careful about coated by a film that prevents ring volume must be adjusted broken glasses or the exposed the surface from damage so that Don’t carefully.
  • Page 12 View the display in a sufficiently Otherwise, the battery pack may ignite, such as a docomo Shop or dispose of it burst or overheat and its electrolyte may light place keeping a certain Don’t in accordance with local waste disposal leak.
  • Page 13 Do not place heavy objects on If a fuse of the DC adapter Precautions for adapters the adapter cord. has blown, replace it with a Fire, burns or electric shock may result. specified fuse. Warning Don’t Fire, burns or electric shock may result. For the specified fuse, refer to each When plugging the AC adapter instruction manual.
  • Page 14 Before cleaning, pull the Turn off the FOMA terminal in Notes on using near electronic power plug out of the outlet or trains during the rush hour or medical equipment cigarette lighter socket. other crowded areas as there Pull the ■The description below meets Fire, burns or electric shock may result.
  • Page 15 ■List of materials used Where it is used Material/Finishing Where it is used Material/Finishing Screw (inside LUMIX Phone panel), Steel/nickel plating Screw (Holder area for 1Seg antenna Outer casing Display surface PC/UV coating inside LUMIX Phone panel) Numeric key side surface ABS/ Menu key, Mail key, Camera key/1Seg PC/aluminum vapor deposition + tin vapor deposition + UV coating...

  • Page 16: Handling Precautions

    Handling Precautions ■Do not apply excessive force onto the ■Do not drop the FOMA terminal or subject General notes FOMA terminal and battery pack. it to strong impacts. ■Do not wet the equipment. If you put the FOMA terminal in a bag along Malfunction or damage may result.
  • Page 17 ⿠ There is very little humidity, vibration, and dust. Magnetic data on cash cards, credit cards, telephone ⿠ There are no land-line phones, television sets or such as a docomo Shop. cards and floppy disks, etc. may be deleted. ■Do not damage, carelessly touch, or short- radios nearby.
  • Page 18 Dial-up Communication, Object Push, and 3. For further details, contact “docomo identifiers shall not be avoided. Serial Port. With Audio, you might be able Information Center” on the back page of this To use on airplane, confirm with airline to use Audio Video Remote Control.
  • Page 19 You might be imposed punishment if you use or stop using wireless LAN function, and them overseas. Using a modified FOMA terminal infringes contact “docomo Information Center” on the the Radio Law. back page of this manual, then consult about The FOMA terminals are granted technical...

  • Page 20: Before Using

    Attach the battery pack. Attach the battery pack. Before Using With the arrow mark facing up, With the arrow mark facing up, Attaching UIM/ Battery Pack fi t the tab side of the battery pack to the FOMA terminal Remove the LUMIX Remove the LUMIX Arrow mark securely, and then push the...
  • Page 21 ⿠You cannot use the UIM (blue) on your FOMA ⿠For detaching, pull out the connector horizontally terminal. If you have that blue one, have it replaced at while pressing the release buttons. Malfunction could a docomo Shop. result if you try to pull it forcibly.
  • Page 22 ■Charging Using Desktop Holder When charging is completed, When charging is completed, hold the desktop holder hold the desktop holder AC Adapter’s Power plug Call/Charging indicator with fi ngers, press down the socket Back case FOMA terminal while holding Engraved surface AC Adapter the upper side of it (C), and Connector...

  • Page 23: Turning Power On

    Turning Power ON Confi guring Initial Setting Press and hold h for at The Initial Setting display appears when you turn on the power for the fi rst time. least one second. Set the date and time. Set the date and time. After the Wake-up display is displayed, the Stand-by display You can set the date and time.

  • Page 24: Checking Your Own Phone Number

    Checking Your Own Phone Number Switching to English Display You can check your own phone number (Own m from the Stand-by display number), the model name, etc. 本体設定 (Setting) ▶ m from the Stand-by 文字表示／入力 (Text display/input) ▶ ▶ display display Profi le ▶...

  • Page 25: Screen Explanation

    Screen Explanation Viewing Display/Icon ··· A Bluetooth device is connected. Battery level (estimate) Wi-Fi reception level (estimate) Wi-Fi reception level (estimate) Wi-Fi reception level (estimate) Wi-Fi reception level (estimate) Wi-Fi reception level (estimate) Full Strong Weak ⿠When is shown, charge the battery. ···...
  • Page 26 Using Motion Control Notifi cation icon ······ New i-mode mail or SMS Motion Control enables to switch the display direction ······ Missed call automatically by tilting the FOMA terminal. ⿠The major functions that support Motion Control are listed below: ····· Record message ・...
  • Page 27 ■ Operating Speed Selector Navigation Displays and Key Operations Key operations you can perform while you are ⿠Moves the cursor or ⿠Moves the cursor to operating a function are shown at the bottom of the highlighted display up. the right. display.

  • Page 28: Menu Operation

    ■ Operating by Turning Speed Selector Menu Operation In some displays, you can turn the speed selector to ■ Main Menu select items the same way as you press , and can Press m from the Stand-by display to show Main Menu. move the cursor.

  • Page 29: Simple Menu

    ■ Simple Menu Functions Starting with Simple Operation Simple Menu is a menu focusing on only basic Depending on the function, you can start it either by functions for easy operation. By setting “Simple menu” selecting a menu item or by key operation from the using the Kisekae tool, you can show the Simple Menu Stand-by display.

  • Page 30: Using Touch Panel

    ■Basic Touch Panel Operations Using Touch Panel Operation Main Operation The touch panel can be used to perform actions such Touch Select/OK as selecting items and scrolling display. “ ” is ⿠Touch an item or control key on Simply tap the touch panel. displayed when the touch panel can be used, and “...

  • Page 31: Screen Lock

    ■Magnification/Reduction Operation Main Operation Pull apart/Pinch together Magnification/Reduction You can zoom in or out ⿠The image or display will zoom in Slide two fingers apart or the pictures displayed in pinch together. or out. the Picture Album and sites displayed in the Full Browser.
  • Page 32 ■ Normal Menu Displaying Touch Menu When “ ” is touched, the Normal You can display the Touch Menu by touching the Menu is displayed. touch panel from the Stand-by display. You can operate any of the functions ■ Home Menu by touching the corresponding icon When “...
  • Page 33 Using Start by Voice Using Guide You can call up the function by voice. You can search and check the operating methods ⿠The fi rst time you use this function, select “利用する (Use)” of the functions you want to know and use. You on the usage information display, or press c( can execute some functions from “使いかたガイド...

  • Page 34: Character Entry

    Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. Select a input mode. Select a input mode. Convert/fi x characters. Press l( Press ) to select one of o to specify the area 1.
  • Page 35 <Example> Entering “タダの菓子” in the text of an i-mode mail message. l from the Stand-by o to move the ▶ display display cursor to the right of “の”. cursor to the right of “ ▶ Select the text fi eld. o to move the Enter hiragana characters in Enter hiragana characters in...

  • Page 36: Sound/Screen Setting

    Sound/Screen Setting Adjusting Ring Volume <Example> Adjusting the ring volume for incoming Changing Ring Tone voice calls <Example> Changing the ring tone for incoming voice ▶ m from the Stand-by display Setting calls ▶ ▶ Sound/Vib./Manner Ring volume ▶ m from the Stand-by display Setting Select “Phone”.
  • Page 37 Using Manner Mode Setting Keypad Sound OFF With a single key press, you can set a tone from the You can silence a Keypad sound for when you press a FOMA terminal such as a ring tone, keypad sound, key. and alarm sound silent.
  • Page 38 ■ ■ Changing Display Brightness Making Display Hard to See from People Around You can adjust the brightness of the display. You can also set to automatically adjust the display brightness You can set “View blind” to make it harder for the according to the ambient light.
  • Page 39 ■ Changing Font Size Using Kisekae Tool <Example> Changing the size of all the characters to You can set the ring tone, Stand-by display, menu “X-large”. icons and others at a time. Press and hold 7 for at least one Press and hold m from the Stand-by display second from the Stand-by display.
  • Page 40 Changing Illumination When Receiving Switching to the eco Mode <Example> Changing call Illumination for voice calls. With a single key press, you can set the eco Mode that reduces battery consumption. Changing to eco ▶ m from the Stand-by display Setting Mode affects items specifi ed in “eco mode setting”, ▶...

  • Page 41: Lock/Security

    (your copy) that is handed over to be displayed. When the mobile phone you at a docomo Shop at the time of contract. If your automatically switches to eco Mode, contract has been made at a shop other than a docomo “...
  • Page 42 This is a four-digit number required for your identifi cation executing Reset Total, using the user certifi cate or when you place an order at a docomo Shop, docomo applying for the issue of it. Information Center, or “お客様サポート (User support)”...

  • Page 43: Various Lock Functions

    You can set your FOMA terminal not in succession, the UIM is locked. In that case contact to be used by a third party. one of docomo Shops. You can do no operations other than answering calls and turning on/off ■...

  • Page 44: Keypad Lock

    Enter your Terminal Security Code Enter your Terminal Security Code ※Unavailable from some IP phones. ▶ ⿠You can set/release also from the My docomo Auto-key lock site via your personal computer or other devices. (In Japanese only) Select “ Closed lock set.” or Select “...
  • Page 45 Setting Incoming Call Restriction Resetting to Default ■ Resetting the Function Settings to Default You can set whether to receive (accept) or not to receive (reject) incoming calls depending on the You can reset the items on “Function List”, which are reason, such as from the parties which has not been indicated by .

  • Page 46: Call Telephone

    ■ Making a Call from Phonebook Call Telephone <Example> Search a Phonebook entry by the name Making a Call/Videophone Call stored in Phonebook ■Making a Call by Entering the Phone o from the Stand-by display. Press Press Number From the Stand-by display, enter a From the Stand-by display, enter a Select “Search name”.
  • Page 47 (Received call from Japan. Press Press ⿠Contact “docomo Information Center” on the back page calls) from the Stand-by display. calls) from the Stand-by display. of this manual for inquiries about WORLD CALL. ⿠When using international carriers other than DOCOMO, Select a call record.

  • Page 48: Receiving A Call/Videophone Call

    Receiving a Call/Videophone Call When You cannot Answer a Call ■ Activate Record Message A call comes in. A call comes in. By activating Record Message, you can record a caller’s The ring tone sounds and the Call/Charging indicator The ring tone sounds and the Call/Charging indicator voice/video message when you cannot answer the call.
  • Page 49 ■ ■ Using Public Mode (Drive Mode) Using Public Mode (Power Off) Once you activate Public mode (Drive mode), the Once you activate Public mode (Power off), the guidance is played back telling that you cannot guidance is played back when receiving a call while answer the call as you are currently driving or in a the power is off, telling that you cannot answer place where you should refrain from speaking on the...
  • Page 50 ⿠The network services are not available when you are out of the service area or out of reach of radio waves. ⿠For details, refer to “Mobile Phone User’s Guide [Network Services]”. ⿠For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual. Service...

  • Page 51: Using Call Forwarding Service

    ■ ■ Using Voice Mail Service Using Call Waiting Service m from the Stand-by display m from the Stand-by display ▶ ▶ ▶ ▶ TEL function Voice mail service TEL function Other network serv. ▶ Call waiting To activate the service ▶...

  • Page 52: Emergency Call

    Emergency Call Emergency Calls Phone number Calls to police Calls to fire station and ambulance Calls for accidents at sea ⿠This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.

  • Page 53: Using Overseas

    Japan, in a service ※3 ○ ー ○ i-mode ○ ー ○ area of the overseas carrier partnered with DOCOMO. It i-mode mail ※3※4 ○ ー ○ i-Channel enables you to continue using the voice call, SMS and ※5 ○...

  • Page 54: Mail

    ■Making a Call to Outside the Country Mail You Stay in Sending i-mode Mail 0(for at least one second) from the ▶ Stand-by display Stand-by display Enter numbers in Once you subscribe to i-mode, you can exchange e-mail order of country code→area code (city messages over the Internet.
  • Page 55 Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or You can create impressive messages by inserting text background color, or insert images or Deco-mail or images into a Flash fi le. pictograms. 1 1 1 1 l from the Stand-by display l from the Stand-by display ▶...
  • Page 56 ■ Replying to i-mode Mail Displaying Received i-mode Mail Press c( Press ) while an i-mode mail ▶ l from the Stand-by display Inbox is displayed. is displayed. Enter each item. Enter each item. Select a folder. Select a folder. Press c( Press Select an i-mode mail message.
  • Page 57 ■ ■ Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail You can use “Auto-sort” to sort received/sent i-mode message or Message R/F. mail messages into a folder such as “Business” or Press and hold l for “Friend”...

  • Page 58: Using Sms

    Early Warning “ Area Mail” Using SMS ■Receiving Area Mail You can send text messages to the mobile phone number at the other party. You can receive information such as about earthquake ■ Sending SMS alerts that are issued from the Japan Meteorological Agency as an Area Mail message.

  • Page 59: Phonebook

    ■ Displaying Received SMS Message Phonebook ▶ l from the Stand-by display Inbox Storing Phonebook Entries ■Storing New Phone Numbers/Mail Select a folder. Select a folder. Addresses, etc. You can store Phonebook entries in the FOMA terminal (Phone) or on the UIM. Select an SMS message.

  • Page 60: Editing Phonebook Entries

    ■Storing Phonebook Entries from Editing Phonebook Entries Redial/Received Call o from the Stand-by display o (Redial) or o (Received Press Press ▶ Search and select a Phonebook entry. calls) from the Stand-by display. calls) from the Stand-by display. ▶ Edit phonebook Highlight a call record and press Highlight a call record and press ▶...

  • Page 61: I-Mode/Full Browser

    i-mode/Full Browser ■Before using i-mode ⿠Content of sites or websites is in general protected Displaying i-mode Sites by copyrights law. You can use data such as text and images for your entertainment, which you download i-mode is a service that enables you, by using the to your i-mode phone, but you cannot use them, part display of the FOMA terminal supporting i-mode or whole of it as is, or modify them for the purpose of...
  • Page 62 Displaying Websites Designed for Switching Browsers You can switch to Full Browser to show the Internet websites incorrectly displayed by i-mode. You can browse Internet websites designed for PCs ⿠The billing system differs between i-mode and Full using the Full Browser function. Browser.

  • Page 63: Viewing And Operating Sites

    Viewing and Operating Sites Saving Site Contents Operations on site viewing display If you save the page once you visited as a screen memo, you can easily refer to it without connecting to Scroll display/Move highlighted/ i-mode. Move the pointer: ) while the site is displayed Select an item (link): ▶...

  • Page 64: I-Channel

    Further, two types of channels, “Basic channel” provided ⿠Note that we do not take any responsibility for a by DOCOMO and “Okonomi (Optional) channel” provided loss, such as pure economic loss resulting from the by IPs (Information Providers) are available. You are not...
  • Page 65 ■ ■ Reading Map Checking Current Location You can start GPS compatible i-αppli, and you can You can locate your current location by GPS. You can read a map of current or specifi ed location. also display a map using this location information ⿠At purchase, “地図アプリ...
  • Page 66 ⿠Set the service to “ON” to automatically and periodically send ⿠When you start to use the AUTO-GPS function, check your location information from the FOMA terminal to DOCOMO. GPS service providers or the DOCOMO website for ⿠To use i-concier or respective services, you need to how you can use services.

  • Page 67: Camera

    Camera Viewing and Touching Operation of Finder Display You can use the camera to shoot still images or moving pictures. You can use the touch panel to operate the camera when shooting. You can check the settings. By touching, you can switch to Touch Zoom.

  • Page 68: Shooting Still Images

    Shooting Still Images/Moving Viewing Still Images/Moving Pictures Pictures after Shooting ■ You can display the still image or the moving picture you Shooting Still Images have shot in Picture Album. You can detect a person’s face on the still image you have shot and expand it, or Press v from the Stand-by display.
  • Page 69 ■ Shooting Still Images Using Auto Shooting in Various Ways Shutter ■ Shooting Still Images Using Omakase The camera automatically shoots identifying the Choice number of faces and the distance between faces by You can shoot 6 or 8 still images one after the other. face recognition.

  • Page 70: 1Seg

    1Seg Using 1Seg ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).

  • Page 71: Watching 1Seg, Etc

    Setting Channels Watching 1Seg When you activate 1Seg for the fi rst time or change Press and hold c for the area you are in, you need to operate “Channel at least one second from setting”. Select “Auto channel setting” to enable you the Stand-by display.
  • Page 72 Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Video being recorded Program Information (outline) Switch Visual Image/Caption Video Caption Airwave Reception Level (estimate) Data 　 　 Broadcasting Strong Weak Operation Mode “ ” appears out of the broadcasting area. : Video Mode Sound Volume : Data Broadcasting Mode...
  • Page 73 Setting Timer Watching or Recording Playing Recorded Video 1Seg m from the Stand-by display ▶ ▶ Set the date and time, a channel, and program name, and Data box 1Seg enter them to the TV Timer List or Timer Recording List. ▶...

  • Page 74: Music

    Music Setting Programs m from the Stand-by display Music&Video Channel ▶ CAMERA/TV/MUSIC ▶ ▶ Music&Video Channel Program set. Music&Video Channel is a service which automatically delivers up to about one-hour programs at night just by Follow the instructions on the display Follow the instructions on the display selecting your favorite music programs etc.

  • Page 75: Playing Music Files

    ® Downloading Chaku-uta Full Playing Music Files Music Files ® MUSIC Player enables you to play Chaku-uta Full music fi les you have downloaded from sites, or to ® You can download Chaku-uta Full music fi les from play Windows Media ®...

  • Page 76: I-Αppli/I-Widget

    i- α ppli/ i-Widget Starting i-αppli Press and hold i for at least one Press and hold second from the Stand-by display. second from the Stand-by display. “i-αppli” is a software program for i-mode mobile phones. By downloading various software programs from the i-mode site, you can use your FOMA terminal more Select a software Select a software...
  • Page 77 Downloading i-αppli from Sites ⿠You can delete the pre-installed i-αppli programs. You can re-download deleted programs from the Select a software program from a Select a software program from a “P-SQUARE” site. downloadable site. downloadable site. You can download not only i-αppli programs but also the pre-installed Chara-den images, Machi-chara Select “OK”...

  • Page 78: I-Motion/Movie

    i-motion/ Movie Downloading i-motion/Movie Select an i-motion/movie fi le from a Select an i-motion/movie fi le from a i-motion is a fi le consisting from video, audio, and downloadable site. downloadable site. music which you can download to your FOMA terminal from i-motion sites that support i-motion.

  • Page 79: Osaifu-Keitai

    Osaifu-Keitai Osaifu-Keitai/ ToruCa Osaifu-Keitai is equipped with the IC card which enables you to make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.

  • Page 80: I-Concier

    Phonebook. It also allows you to share the schedules or images held by the DOCOMO’s Data Storage Center with friends, family members or other groups. It also enables you to easily print out the images...

  • Page 81: Convenient Tools

    Convenient Tools Using Alarm ▶ m from the Stand-by display Tool Using Schedule ▶ Alarm m from the Stand-by ▶ ▶ display display Tool Schedule Highlight an alarm and press Highlight an alarm and press Select a date to show a schedule event of the selected date.
  • Page 82 QR code is one of the 2-dimensional codes that denotes data in the vertical Select the URL Select the URL and horizontal directions. ▶ Select “i-mode Browser”. ⿠“株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan the QR code with the FOMA terminal.

  • Page 83: Connecting With Bluetooth Devices

    ■Connecting with Bluetooth Devices Bluetooth Function ▶ m from the Stand-by display Tool You can connect your FOMA terminal to a Bluetooth ▶ ▶ Bluetooth Device list device such as Wireless Earphone Set 02 (option), and can talk on the phone or play music fi les. Select a Bluetooth device Select a Bluetooth device ■Registering a Bluetooth Device to...

  • Page 84: Using Pedometer

    Using Pedometer Creating Handwriting Photo/Memo As you walk with your FOMA terminal in hand or On the touch panel, you can draw pictures or write in your pocket, your pace is measured, and then characters by hand onto the images or you can add depending on the measured results, your distance, decoration.

  • Page 85: Data Management

    ■ Inserting/Removing microSD Card Data Management With the metal With the metal Using microSD Card terminal surface terminal surface facing downward, If you do not have a microSD card, you need to purchase make sure that the cut edge is ⿠P-03C supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 32 Gbytes (As of positioned at right and then insert.
  • Page 86 ■ Formatting microSD Card Icons on the Display When you use the microSD card for the fi rst time, you need to format (initialize) it. ⿠Be sure to use P-03C for formatting. The microSD card formatted using other devices such as personal : A microSD card is inserted.
  • Page 87 ■ ■Displaying Data Stored on microSD Copying Data to microSD Card Card <Example> Copying a still image <Example> Displaying a still image m from the Stand-by display m from the Stand-by display ▶ ▶ Data box My picture ▶ ▶ ▶...

  • Page 88: Infrared Communication

    ■ Backing up Data to microSD Card Sending/Receiving Data by Infrared Communication/ iC Communication You can back up Phonebook entries, schedule events, messages, memos, bookmarks, and the You can send or receive data such as Phonebook settings on and information about your FOMA entries to or from a device supporting infrared terminal collectively onto the microSD card.

  • Page 89: Sending Data

    ■Sending Data Connecting to a PC ⿠For infrared communications, set the receiving end terminal You can connect the FOMA terminal to a personal fi rst, and then start sending data within 30 seconds. computer to exchange WMA fi les, images or other fi les stored on microSD card.

  • Page 90: Support

    …When you use the desktop holder, make sure the connector DOCOMO. terminal of the FOMA terminal is not stained. If it is stained, wipe the terminal part with a dry cotton swab, etc.
  • Page 91 The usable time of the battery is short. Cannot talk. …Make sure not to leave the FOMA terminal out-of-service-area for (“ ” does not disappear even if you move to another place. a long time. If your FOMA terminal is left out-of-service area, it You cannot make or receive a call, though the radio wave searches for radio waves to establish communications, consuming conditions are not bad.)
  • Page 92 Bring your FOMA terminal to a repair counter specified by ■After the warranty period DOCOMO. Note that your FOMA terminal is accepted for repair We will repair your FOMA terminal on request (charges will apply). during the repair counter’s business hours. Further, note that you ■Spare parts availability period...

  • Page 93: Support Information

    Note that when we cannot ensure the contents described on the Diagnosis Site)” [in Japanese only] nameplate and therefore cannot verify the product conformity to the technical standard, it might happen that we at DOCOMO i-mode site: i Menu→お知らせ (News) reject to repair the malfunction.

  • Page 94: Updating Software

    If you need to update the software programs, the DOCOMO website and “お客様サポート (User support)” in Japanese i Menu lets you know information about updating software programs. There are three kinds for updating software programs;...
  • Page 95 ■ ■Start Software Update from Menu Start Software Update from Icon m from the Stand-by display Select “Update notifi cation icon” on the Select “Update notifi cation icon” on the Stand-by display. Stand-by display. ▶ ▶ Setting Other setting ▶ Software Update Enter your Terminal Enter your Terminal...
  • Page 96 FOMA terminal, or when no virus pattern data supporting them is found, this function does not prevent troubles from occurring. ⿠The virus pattern data installed on the FOMA terminal differs in content by every model. Note that we at DOCOMO might stop distributing the virus pattern data for models on market for last three years since their release.

  • Page 97: Introduction Of Options And Related Devices

    Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.

  • Page 98: Appendix

    Appendix Area Mail setting Mail setting Check settings Reset Function List i Menu/Search Execute “Resetting the Function Settings to Default” Bookmark on page 43 for the items indicated by to return to Screen Memo the respective defaults. Browsing history Enter URL Inbox Enter URL URL enter history...
  • Page 99 Software list (phone) Digicam mode Software list Photo mode i αppli (microSD) Camera i αppli data Movie mode i αppli call logs Picture album End stand-by info Activate 1Seg End Widget appli info Program guide i αppli run info Security error history TV timer list Auto start info Timer recording list...
  • Page 100 Reference history Pedometer Common phrases Phrases/Store word Data check/Download Store word Update phonebooks etc. Download dictionary Data Security Update images Contact DOCOMO Service Update setting info Search phonebook Setting/History Add to phonebook Refer microSD data Phonebook UIM operation microSD Backup/Restore Phonebook set./Check...
  • Page 101 In-call setting Call forwarding Headset function set. Call waiting Dial/Receive setting Call rejection set. English guidance Missed call notice Remote access Other network serv. Visual preference Multi Number Select image Dual network Auto redial as voice Additional service Videophone setting Ntfy switch-mode OFFICEED Reject videophone...
  • Page 102 Ring volume Battery level Select ring tone Battery eco mode setting Other sound setting Auto eco mode setting Sound/Vib./Manner Vibrator setting USB mode Manner mode setting Bluetooth Stereo&3D sound External connection Headset microphone Machi-chara chat set. Femtocell Backlight Wi-Fi Backlight/Illum. Illumination setting Touch menu open set.
  • Page 103 Location history IC card content Map setting DCMX ToruCa GPS button setting Location request set. IC card lock IC card lock setting Map&GPS set./ AUTO-GPS IC lock (power-off) history Positioning mode set. ToruCa settings Setting Receive ToruCa Register LCS client Service setting IC card notice set Serv.

  • Page 104: Main Specifications

    Main Specifications Recording Number of Approx. 2,400 max. (default) recordable still ■Handset ※1 images Model P-03C Number of For Digicam Mode in Continuous setting Dimensions (when closed) Height: Approx. 116 mm still images 3M: 6 2M Wide: 8 Width: Approx. 52 mm for continuous 2M: 8 Stand-by: 8...
  • Page 105 ■Battery pack ■Recordable time of 1Seg Name of product Battery Pack P20 Maximum (total) recordable time Approx. 640 minutes Battery type Li-ion (lithium ion) battery to the microSD card (2 Gbytes) Voltage 3.7 V Maximum (total) recordable Approx. 10,240 minutes Capacity 800 mAh time to the microSDHC card (32...

  • Page 106: Sar Certification Information

    NTT Specific Absorption Rate (SAR) of DOCOMO, INC.** In case you are not using the approved accessory, Mobile Phone please use a product that does not contain any metals, and one that positions the mobile phone at least 1.5 cm away from your body.

  • Page 107: European Rf Exposure Information

    ■European RF Exposure Information ■Declaration of Conformity This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to The product “P-03C” is declared to conform with the essential requirements exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which of European Union Directive 1999/5/EC Radio and Telecommunications SAR* value, when tested for compliance against the standard was 0.574 W/kg.

  • Page 108: Fcc Rf Exposure Information

    ■FCC RF Exposure Information ■Important Safety Information AIRCRAFT This model phone meets the U.S. government’s requirements for exposure Switch off your wireless device when boarding an aircraft or whenever you are to radio waves. instructed to do so by airline staff. If your device offers a ‘flight mode’ or similar Your wireless phone contains a radio transmitter and receiver.

  • Page 109: Intellectual Property Right

    ■Others ⿠“FOMA”, “i-mode”, “i-αppli”, “i-motion”, “Deco-mail”, “Chara-den”, “ToruCa”, “WORLD CALL”, “DCMX”, “i-area”, “WORLD WING”, “OFFICEED”, “2in1”, “docomo PRIME ⿠This product contains NetFront Browser, NetFront Document series”, and the logos of “i-mode”, “i-αppli”, and “Music&Video Channel” are Viewer and NetFront Sync Client of ACCESS CO., LTD.
  • Page 110 Bluetooth SIG, Inc. and any license, also download revocation lists onto your device on behalf of Secure Content use of such marks by NTT DOCOMO, INC. is under license. Other trademarks and Owners.
  • Page 111 ⿠The HMM-Based Speech Synthesis Engine embedded in this product uses the Simplified BSD License. ------------------------------------------------------------------- The HMM-Based Speech Synthesis System (HTS) hts_engine API developed by HTS Working Group http://hts-engine.sourceforge.net/ ------------------------------------------------------------------- Copyright © 2001-2010 Nagoya Institute of Technology, Department of Computer Science 2001-2008 Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering All rights reserved.

  • Page 112: Index

    Index Call forwarding service ....49 Call rejection setting ....43 AC adapter ........19 Early warning “Area Mail” ... 56 Call waiting service ..... 49 After-sales service ....... 90 Earphone ........4 Camera ........5, 65 Alarm ..........79 Earpiece .......... 4 Channel setting ......
  • Page 113 Music&Video channel ....72 Handwriting photo/memo ... 82 Keypad lock........42 Holding ......... 44 Keypad sound ......35 Navi ..........63 Home menu ........30 Kisekae tool ......... 37 Navigation displays ..... 25 Network security code ....40 Network services ......48 i-αppli ..........
  • Page 114 Scanning function ....... 94 ToruCa .......... 77 Search phonebook ..... 44 Picture album ....... 66 Schedule ........79 Touch menu........30 PIN1 code ........40 Screen lock ........29 Touch operation guide ....30 PIN1 code entry set ..... 41 Screen memo .......
  • Page 115 My docomo (http://www.mydocomo.com/) ⿠“お客様サポート (User support)” and My docomo are available in Japanese only. ⿠If you do not have or you have forgotten your “network ID” or “docomo ID/password”, ⿠You will need your “network ID” for the access from i-mode.
  • Page 116 Please confi rm the phone number before you dial. For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site. NTT DOCOMO website http://www.nttdocomo.co.jp/english/...
  • Page 117 Installing DOCOMO Connection Manager........

  • Page 118: Data Communication Available From Foma Terminal

    The communication speed might be lowered when you connect the FOMA terminal to an access point which does not support HIGH-SPEED or the terminal is outside the FOMA High-Speed Area, or when you use the device which does not support High-Speed such as DOCOMO’s PDA “sigmarion ”.

  • Page 119: Before Using Data Communication

    FOMA service fee, you need to directly pay this charge to the Internet service provider. For details on the charge, contact the Internet service provider you use. You can use the DOCOMO Internet access service, “mopera U”. To use “mopera U”, subscription (charged) is required.

  • Page 120: Operating Environment

    (Dial-up Networking Profile) Display resolution 800 x 600 dots, high color 16 bits or more recommended. ≥For DOCOMO Connection Manager, display resolution 1024 x 600 dots or more (1024 x 768 dots or more recommended) Windows 7 32-bit version/64-bit version (Japanese version)

  • Page 121: Setup Flow For Data Transfer (Obex™ Communication)

    Charge Function 02, install the “FOMA communication configuration file” (driver) from the provided “P-03C CD-ROM” onto the personal computer. You are advised to install “DOCOMO Connection Manager” which enables you to easily set up the APN or dial-up for communication.
  • Page 122 Connecting PC and the FOMA Terminal The following steps explain how to connect the FOMA USB Cable with Charge Function 02 (option). Check the direction of the Connector terminal connector terminal of the FOMA External connector terminal, then straight insert the (Face up the engraved external connector of the FOMA surface of the connector...

  • Page 123: Installing Foma Communication Configuration File (Driver)

    Installing FOMA Communication Configuration File (Driver) Installing the FOMA communication configuration file (driver) is required when you connect the FOMA terminal to your personal computer via the FOMA USB Cable with Charge Function 02 (option) for the first time. ≥When connecting wirelessly using Bluetooth communication, you do not need to install the FOMA communication configuration file (driver).
  • Page 124 For Windows 7 “ (Start)]” 1Open “ (Devices and printers)”. Open “docomo PRIME series P-03C” 1Click the “ (Hardware)” tab. Confirm the installed driver names. Confirm that all driver names are displayed. ≥The COM port number varies depending on the personal...
  • Page 125 For Windows Vista, Windows XP “ (Start)]”1Open “ (Control panel)” 1Open “ (System and maintenance)”. <For Windows XP> “ (Start)” Open “ (Control panel)” “ (Performance and maintenance)” Open “ (System)”. Open “ (Show hardwares and devices)” 1Click “ (Continue)”. <For Windows XP>...

  • Page 126: Control Panel

    Uninstall FOMA Communication Configuration File (Driver) When uninstalling the “FOMA communication configuration file” (driver) is necessary (such as when upgrading the version), perform the operation below. ≥Operate as the user who has the PC administrator right. If the FOMA terminal is connected to a personal computer via the FOMA USB Cable with Charge Function 02 (option), disconnect the FOMA USB Cable with Charge Function 02.

  • Page 127: Preparing Bluetooth Communication

    < Dial-up Communication Service > Preparing Bluetooth Communication You can make data communication by connecting a Bluetooth communication compatible personal computer wirelessly to your FOMA terminal. Connect to Personal Computer for the First Time To connect a personal computer to the FOMA terminal for the first time, register the personal computer to the FOMA terminal.
  • Page 128 Confirm the Modem Before setting communication, confirm the name and COM port number of the modem used for connecting the dial-up service. For Windows 7 “ (Start)]” 1Open “ (Devices and printers)”. Open “P03C”1Click the “ (Hardware)” tab. Confirm the modem name or COM port number. For Windows Vista, Windows XP “...

  • Page 129: Docomo Connection Manager

    DOCOMO Connection Manager “DOCOMO Connection Manager” is a convenient software program to perform flat-rate data communication and volume charging data communication. It enables you to sign up for “mopera U” and easily make PC settings according to your contract situation. It also enables you to check the estimate data traffic and usage amount with the charge counter function.

  • Page 130: Before Installing Docomo Connection Manager

    (mopera U connection & setting tool) (FOMA PC configuration software) (FOMA byte counter) When you use Mzone (DOCOMO public wireless LAN service) with this software program, uninstall the following public wireless LAN connection software programs. You cannot use Mzone when they are simultaneously installed:...

  • Page 131: Installing Docomo Connection Manager

    When MSXML6 and Wireless LAN API are not installed on the Windows XP environment, you need to install them before installing “DOCOMO Connection Manager”. When a confirmation display appears, click “Install” and install MSXML6/Wireless LAN API. When you restart Windows after installation of MSXML6/Wireless LAN API is completed, installation of “DOCOMO Connection Manager” automatically starts.
  • Page 132 Click “ (Next)”. Confirm the display precautions and click “ (Next)” Confirm the licensing contract contents. If you agree with the contents, select “ (Agree with the licensing contract contents)” and click “ (Next)”. Confirm the installation destination folder, then click “...
  • Page 133 Click “ (Install)”. Installation starts. Click “ (Finish)”. Installation is completed.

  • Page 134: Starting Docomo Connection Manager

    When this is the first start-up, the setting wizard appears automatically. Hereafter, proceed operation/settings following the instruction of software to complete the preparation to access the Internet. For details, refer to “ .pdf (DOCOMO Connection Manager operation manual by PDF format)”. When you disconnect the communication line You cannot disconnect the communication line only by exiting a browser software or e-mail software.

  • Page 135: Setting Dial-Up Network

    AT command is required. “Hyper Terminal”, which is attached to Windows as the standard software, is used here for explanation. When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN) (see page 21).
  • Page 136 (driver). The confirmation method varies depending on the operating system of your personal computer. ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN); therefore, you do not need to confirm the modem.
  • Page 137 Open the “ (Modem)” tab, confirm the COM port number in the “ (Access point)” field of “FOMA P03C”, then click “OK”. ≥When connecting wirelessly using Bluetooth communication, confirm the COM port number of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker in the “...
  • Page 138 Set an Access Point Name (APN) This section explains how to set an access point name (APN) for packet communication. You can register up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 23). When using “mopera U”...
  • Page 139 Select a connection method. <When you can select the COM port number of “FOMA P03C”> Select the COM port number with which you install the “FOMA P03C” in the “ (Connection method)” field, then click “OK”. Then, go to step 6. ≥Here, “COM3”...
  • Page 140 Confirm that “OK” appears on the display. “ (File)” menu1Select “ (Exit Hyper Terminal)” to exit Hyper Terminal. ≥If the message “ (Currently connected. Do you want to disconnect this line?”) appears, select “ (Yes)”. ≥The message “ (Do you want to save session XXX?)” then appears. You do not need to especially save that session.
  • Page 141 Confirm that “OK” appears on the display. Information ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”. ≥If the entered AT command is not displayed, enter “ATE1 ”. Specifying “caller ID notified/not notified” in dial-up network Also by dial-up network setting (see page 27), you can add “186 (notify)”...
  • Page 142 Set Dial-up Network for Windows 7 “ (Start)]” 1Open “ (Control panel)” 1“ (Connection to Internet)” 1Click “ (Dial-up connection)”. ≥After the access point has been set, the confirmation display appears asking whether the existing connection is to be used. In response, check “ (No, I will create a new connection)”, then click “...
  • Page 143 Highlight the access point which is finished with setting, and select “ (Property)” after the right click 1Click the “ (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “ (Modem) - FOMA P03C”...
  • Page 144 Set Dial-up Network for Windows Vista “ (Start)]”1“ (Access point)”1Click “ (Setup the connection or network)”. Select “ (Setup the dial-up connection)”, then click “ (Next)”. If the display for selecting a modem appears, click “FOMA P03C”. ≥When connecting wirelessly using Bluetooth communication, put a check mark for only the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker.
  • Page 145 Click the “ (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “ (Modem) - FOMA P03C” or “ (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...
  • Page 146 Set Dial-up Network for Windows XP “ (Start)”1“ (All programs)” 1“ (Accessories)”1“ (Communications)” 1Open “ (New connection wizard)”. When the “ (New connection wizard)” display appears, click “ (Next)”. Select “ (Connect to the Internet)”, then click “ (Next)”. Select “ (Manually set up the connection)”, then click “...
  • Page 147 Enter an access point number in the “ (Phone number)” field, then click “ (Next)”. ≥When connecting to “mopera U”, enter “¢99¢¢¢3#” as the access point number. See page 23 for access point numbers other than “mopera U”. Enter the user name and password supplied from your Internet service provider or network administrator in the...
  • Page 148 Click the “ (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “ (Modem) - FOMA P03C” or “ (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...

  • Page 149: Making Dial-Up Connection

    Making Dial-up Connection Making Dial-up Connection for Windows 7 Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ (Start)]”1Open “ (Control panel)” 1Click “ (Connection to Internet)”. Check “ (Yes, I choose the existing connection)”, then select the access point, and click “...
  • Page 150 Making Dial-up Connection for Windows Vista Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ (Start)]”1Open “ (Access point)”. Select access point and click “ (Connect)”. Confirm the contents and click “ (Dial)”. ≥When connecting to “mopera U”...
  • Page 151 Making Dial-up Connection for Windows XP Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ (Start)”1“ (All programs)” 1“ (Accessories)”1“ (Communications)” 1Open “ (Network connection)”. Open the access point to be used. Select the access point icon of the ISP name (see page 29) you specified in “Set Dial-up Network”, then “...

  • Page 152: Connecting And Disconnecting

    Set 64K Data Communication This section explains how to set up a connection for the 64K data communication without using “DOCOMO Connection Manager”. Setting dial-up connection and TCP/IP The setting of dial-up connection and TCP/IP for the 64K data communication is the same as for the packet communication (see page 18).

  • Page 153: At Command

    AT Command AT commands are used to specify and modify the functions of the FOMA terminal through the personal computer. The following abbreviations are used in the AT command list: [AT]: Commands which are available at the FOMA P03C Command Port. [M]: Commands which are available in the FOMA P03C (modem).

  • Page 154: At Command List

    AT Command List Command execution AT command Outline Parameter/Explanation example Re-executes the last executed command. No carriage return is required. AT%V Displays the version of the AT%V FOMA terminal. Ver1.00 AT&Cn Selects the operating conditions n=0: CD is always ON. AT&C1 of the circuit CD signal sent to n=1: CD varies according to the carrier of the other...
  • Page 155 Command execution AT command Outline Parameter/Explanation example AT¢DGPIR=n This command is valid at dialing/ n=0: Uses the APN as it is. (default) AT¢DGPIR=0 receiving calls. n=1: Adds “184” to the APN. (always not notify) In the dial-up network setting, n=2: Adds “186” to the APN. (always notify) AT¢DGPIR? you can add “186”...
  • Page 156 Command execution AT command Outline Parameter/Explanation example AT+CGREG=n Sets whether the network n=0: Not notified. (default) AT+CGREG=1 registration state is notified. n=1: Notified at switching between the inside and Displays whether you are inside outside of the service area. (set to “Notified”) or outside the service area (Inquiry) AT+CGREG?
  • Page 157 Command execution AT command Outline Parameter/Explanation example AT+COPS=n,2,m Selects the carrier to be n=0: Automatic (searches the network and switches the AT+COPS=1,2,"44F001" connected. network operator automatically) (default) n=1: Manual (connects to the network operator specified in “m”) n=2: Disconnects the connection to the network operator n=3: Mapping is not performed.
  • Page 158 Command execution AT command Outline Parameter/Explanation example AT+CREG=n Sets whether the result is n=0: Not notified. (default) AT+CREG=1 displayed about the inside and n=1: Notified at switching between the inside and outside of the service area. outside of the service area. (set to “Notified”) (Inquiry) AT+CREG?
  • Page 159 Command execution AT command Outline Parameter/Explanation example ATIn Displays the ID code. n=0: Displays “NTT DoCoMo”. ATI0 n=1: Displays the product name. (same as +GMM) NTT DoCoMo n=2: Displays the version of the FOMA terminal. (same as +GMR) ATI1 n=3: Displays ACMP information element.
  • Page 160 Command execution AT command Outline Parameter/Explanation example ATZn Resets the setting to the Only n=0 is specifiable. (Can be omitted) (In online) contents of the nonvolatile memory. If this command is NO CARRIER entered during communication, (In offline) the line is disconnected. AT¥Sn Displays the contents of the each Only n=0 is specifiable.
  • Page 161 ≥Command name: +CGEQMIN=[parameter] Outline This command registers the reference value to judge whether the system permits QoS (Quality of service) reported from the network at establishment of the packet communication. You can specify four setting patterns described in the command execution example below. Format +CGEQMIN=[<cid>[,,<Maximum bitrateUL>[,<Maximum bitrate DL>]]] Explanation of parameters...

  • Page 162: Result Codes

    Disconnection Reason List 64K Data Communication Value Reason The specified number does not exist. The line was normally disconnected. Cannot communicate because the other party is communicating. Dialed but no response has come in within the specified duration. Cannot communicate because the other party is dialing. The other party rejected to receive the call.
  • Page 163 For &E1 Numeric Character notation Connection speed notation CONNECT 1200 1,200bps CONNECT 2400 2,400bps CONNECT 4800 4,800bps CONNECT 7200 7,200bps CONNECT 9600 9,600bps CONNECT 14400 14,400bps CONNECT 19200 19,200bps CONNECT 38400 38,400bps CONNECT 57600 57,600bps CONNECT 115200 115,200bps CONNECT 230400 230,400bps CONNECT 460800 460,800bps...
  • Page 164 P-03C Kuten Code List...
  • Page 165 <How to read Kuten Code List> First enter the number for “Kuten digit 1 to 3”, and enter the number for “Kuten digit 4”. ≥Some characters in Kuten Code List may appear different on the display. Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit...
  • Page 166 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3...
  • Page 167 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3...
  • Page 168 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 November ’10 (1st Edition) F1010-1...

Table of Contents