Sending Data; Connecting To A Pc - Docomo P-01H Instruction Manual

Sending Data

⿠For infrared communications, set the receiving end terminal
first, and then start sending data within 60 seconds.
1
Submenu of the data to be sent
▶
Select "Send Ir data" or "iC
transmission"
⿠Procedure for sending data might differ depending on the data.
Receiving Data by Infrared Communication
1
m ▶ ▶
Tool Receive Ir data
▶
YES
Receiving Data by iC Communication
1
Face the f mark of the receiving end
terminal which shows the Stand-by
display, to the f mark of the sending
end terminal.
2
Select "YES".
72
▶
YES
▶
Receive

Connecting to a PC

You can connect the FOMA terminal to a personal computer
to exchange WMA files, images or other files stored on
microSD card.
You can also access the Internet to perform data
communication.
※You need the FOMA USB Cable with Charge Function 02
(option).
※To perform data communication, you need to install the
"FOMA communication configuration file" (driver).
For details, refer to "Manual for PC Connection".
You can download the "FOMA communication configuration
file" and "Manual for PC Connection" from the DOCOMO
website. (
h ttps://www.nttdocomo.co.jp/english/support/
(
)