Handling Precautions - Docomo P-01H Instruction Manual

List of materials used
■P-01H Handset/Back Cover P63/Battery
Pack P32
Where it is used Material/Finishing
Outer Display PC/UV coating
casing surface,
Battery
surface,
Battery
surface
(Hinge
side)
Connector terminal Stainless steel/
nickel plating, tin
plating
Connector Fitting pin Polyester series
terminal area elastomer
cover
Packing Silicon rubber
Body PC/UV coating
Panel of camera lens PMMA/hard coating
area, Display panel,
Sub-display panel
Charging terminal Brass/nickel plating,
nickel palladium
plating, gold plating
Key area, Sheet area of Acrylic urethane
numeric key surface
Battery compartment Stainless steel/
surface nickel plating
Battery Resin part PA
terminal
Terminal Titanium copper
area alloy/nickel plating,
gold plating
Where it is used Material/Finishing
Battery Resin part PC
pack
Submerge PET
decision
seal
Terminal Glass epoxy/nickel
area plating, gold plating
Label PET/Silicon varnish
docomo Substrate Glass epoxy/gold
mini UIM part plating
card insert
Metal part Stainless steel
part
of tray
Resin part LCP
of tray
Hinge area Center PC/UV coating
area of
display
surface,
Hinge
support
area, Both
ends area
Center ABS/UV coating
area of
sub-display
surface
Multi key (Side key) ABS
Label (Battery PET
compartment surface)
Back cover Packing Silicon rubber
Body PC/UV coating
One-push open button PC
■Desktop Holder P55
Where it is used Material/Finishing
Outer casing ABS
Connector terminal PPS
Cushion Urethane
Charging terminal Phosphor bronze/
nickel plating, gold
plating
Label PP synthetic paper/
PET
Lever POM

Handling Precautions

General notes
■ The P-01H is provided with the waterproof/
dust-proof performance, however, do not
allow water to seep or dust to get in the
inside of the FOMA terminal, or do not
allow accessories and optional items to get
wet or adhere dust.
The battery, adapter, desktop holder,
and docomo mini UIM card are not
waterproofed/dust-proofed. Do not use them
in environments, which are high in humidity
such as in bathrooms, and do not allow them
to get wet from rain. Furthermore, if carrying
them against your body, they become moist
due to perspiration and the internal parts
may become corroded, causing malfunction.
If the parts are found to have been damaged
due to exposure to the liquids, any repairs
will not be covered by warranty, or repairs
may not be possible.
This may be repaired at a cost if repairs are
possible.
13