1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. P-04B
  6. Instruction manual

Docomo P-04B Instruction Manual

W-cdma/gsm/gprs system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-04B
'10.5
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-04B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Docomo P-04B

Summary of Contents for Docomo P-04B

  • Page 1 P-04B ’10.5 INSTRUCTION MANUAL...
  • Page 2 For Using This Manual and their operating procedures. (In Japanese only) ⿠Note that “P-04B” is referred to as “FOMA terminal” in this manual. ⿠Most operating procedures and displays in this manual are described http://www.nttdocomo.co.jp/support/trouble/manual/ with the default settings of the “WHITE”...

  • Page 3: Table Of Contents

    Introduction FOMA Terminal ····································2 Styles ···················································6 Contents What You can Do with P-04B ···············3 Precautions ··········································7 P.1 ～ ▶ Part Names and Functions ··················4 Handling Precautions ························15 Before Using ·····························18 Character Entry·························28 Lock/Security ····························35 Basic Charging, Power ON/OFF, etc. Various Security Codes,...

  • Page 4: Foma Terminal

    SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifi ers shall be responsible for any such damage or loss.

  • Page 5: What You Can Do With

    What You can Do with P-04B 使いかたナビ (Guide) ○○ Railway Suspension of the eco Mode ▶ You can check “使いかたナビ (Guide)” P.35 service now... onscreen for how to operate a You can easily switch to function you want. the eco Mode to minimize...

  • Page 6: Part Names And Functions

    Part Names and Functions ❶ ❶ Light sensor ❼+ �+ d Start key/Hands-free h Power/End key For sensing brightness (Do not switch key For turning on/off the power or ❷ cover it with your hands or do ending a call ❽+ w Picture album key not put a sticker on it.
  • Page 7 � Call/Charging indicator �. < Side ▲ key Lights while you are receiving a call or For turning up the earpiece volume during a call � message, talking, or charging. �. > Side ▼ key � Dot illum. For turning down the earpiece volume during a call �...

  • Page 8: Styles

    Styles The P-04B comes with two styles. ■ Normal Style You can open the FOMA terminal easily by one-push key operation. ( One-push Open) ⿠You can open it also manually without using the button. ⿠You need to close the FOMA terminal manually. If it does not close, open it fully and then close it.

  • Page 9: Precautions

    Precautions ALWAYS FOLLOW THESE DIRECTIONS ■ Before using the FOMA terminal, read these safety precautions ■The following symbols show specifi c directions: carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. Denotes things not to do.
  • Page 10 General precautions for FOMA the batteries and adapters other places where fl ammable terminal, batteries, adapters, specifi ed by NTT DOCOMO, INC. gases are in the atmosphere, be and UIM Fire, burns, injury or electric shock may absolutely sure to turn off the result.
  • Page 11 Do not store in humid or dusty Do not turn on the flash/photo Precautions for FOMA terminal places, or in high temperature light to drivers of cars, and environments. others. Warning Don’t Don’t Fire, burns or electric shock may result. It disturbs driving, and accidents may result.
  • Page 12 For those with weak heart If the display part or camera Do not open the FOMA terminal conditions, the vibrator and lens is broken, be careful about by pressing the one-push open ring volume must be adjusted broken glasses or the exposed button near persons around you Don’t carefully.
  • Page 13 ■Check the description on the label of leak. such as a docomo Shop or dispose of it the battery pack for the type of battery. If the battery fluid gets into your in accordance with local waste disposal eyes, do not rub them.
  • Page 14 Do not place heavy objects on If a fuse of the DC adapter Precautions for adapters the adapter cord. has blown, replace it with a Fire, burns or electric shock may result. specified fuse. Warning Don’t Fire, burns or electric shock may result. For the specified fuse, refer to each When plugging the AC adapter instruction manual.
  • Page 15 If liquids such as water get in Turn off the FOMA terminal in Notes on using near electronic the adapter, unplug the power trains during the rush hour or medical equipment cord immediately from the outlet other crowded areas as there Pull the or cigarette lighter socket.
  • Page 16 ■List of materials used Where it is used Material/Finishing Battery pack Resin area Polycarbonate Where it is used Material/Finishing Label PET resin Outer casing Display surface Polycarbonate + glass fiber/UV coating Terminal area Glass epoxy substrate/ Dot illum. surface Polycarbonate/UV coating nickel plating + gold plating Operation key ABS resin/UV coating...

  • Page 17: Handling Precautions

    Handling Precautions ■Do not apply excessive force onto the ■Do not insert an external device to the General notes FOMA terminal and battery pack. connector terminal (earphone/microphone ■Do not wet the equipment. terminal) at a slant when connecting, and If you put the FOMA terminal in a bag along with many other articles or sit with the FOMA do not pull it out when it is inserted.
  • Page 18 ⿠ There is very little humidity, vibration, and dust. your FOMA terminal. ⿠ There are no land-line phones, television sets or such as a docomo Shop. Problems with operation may result if items with ■Do not damage, carelessly touch, or short- radios nearby.
  • Page 19 Dial-up Communication, Object Push, and mobile phone in your hand while driving. If you 3. For further details, contact “docomo Serial Port. With Audio, you might be able answer a call out of necessity, tell the caller with Information Center”...

  • Page 20: Before Using

    FOMA terminal when you install or remove the UIM. communications such as voice/videophone ⿠You cannot use the UIM (blue) on your FOMA calls, i-mode, or sending/receiving mail, terminal. If you have that blue one, have it replaced at unless the UIM is inserted. a docomo Shop.
  • Page 21 When charging is completed, hold the When charging is completed, hold the Charging desktop holder with fi ngers and lift up desktop holder with fi ngers and lift up ■Charging Using the Desktop Holder the head of FOMA terminal to remove. Plug the Plug the Call/Charging...
  • Page 22 Turning Power ON Confi guring Initial Setting h for at The Initial Setting display appears when you turn on Press and hold the power for the fi rst time. least one second. Set the date and time. Set the date and time. After the Wake-up display is displayed, the Stand-by display You can set the date and time.

  • Page 23: Checking Your Own Phone Number

    Checking Your Own Phone Number Switching to English Display m from the Stand-by m from the Stand-by display 設定／サービス (Set./Service) ▶ ▶ display display Phonebook ディスプレイ (Display) ▶ ▶ Own number バイリンガル ( Select language) ▶ o to switch the You can press tabs.

  • Page 24: Screen Explanation

    Screen Explanation Viewing Display/Icon Battery level (estimate) Status icon ········ Vibrator is set. Full ········ Ring Volume is set to ⿠When is shown, charge the battery. “Silent”. ⿠Depending on the usage ········ In Manner Mode state, the battery level indication ····...
  • Page 25 Dot Illum. Notifi cation icon Information and animation are displayed on the dot ····· New i-mode mail or illum. just as shown in the examples below. ······Missed call ·······Record message ······· Videophone record While a call is being received When mail messages have message been received successfully ⿠Information and animation are displayed also in the...
  • Page 26 Navigation Displays and Key Operations Navigation Displays while Dialing ■Key Operations in Normal Style Enter numeric strings in the Stand-by display. Then key operations for the function that you can use according Key operations you can do while you are operating to the number of digits appear in the display.
  • Page 27 ■Command navigation key Difference in key operations Key assignments differ between Normal Style and ⿠Moves the cursor or ⿠Moves the cursor to the Horizontal Open Style. Follow and operate respective highlighted display up. (Hold right. Navigation displays. ⿠Scrolls forward page by down to scroll continuously.) <Example: Displaying the Function Menu on the Inbox ⿠Scrolls the page up.

  • Page 28: Menu Operation

    ■Horizontal Open Menu Menu Operation m from the horizontal Stand-by display to ■Main Menu Press open Horizontal Open Menu that enables you to m from the Stand-by display to show Main Menu. Press quickly access the functions that are available to the horizontal display.
  • Page 29 Function menu Functions Start to Work by Simple Operation When “ ” is displayed at the lower right of the Depending on the function, you can start it either by display, you can use functions such as Store, Edit, and selecting a menu item or by key operation from the Delete by pressing Stand-by display.

  • Page 30: Character Entry

    Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. Switch between input modes. Switch between input modes. Convert/fi x characters. Each time you press Each time you press o to specify the area 1.
  • Page 31 <Example> Entering “タダの菓子” in a text memo. m from the Stand-by o to move the ▶ display display Stationery cursor onto “の”. cursor onto “ ▶ Text memo ▶ Select <Not recorded>. o to move the Enter hiragana characters Enter hiragana characters in Kanji/Hiragana input in Kanji/Hiragana input cursor onto the candidate...

  • Page 32: Sound/Screen Setting

    Sound/Screen Setting Adjusting Ring Volume <Example> Adjusting the ring volume for incoming Changing Ring Tone voice calls m from the Stand-by display <Example> Changing the ring tone for incoming voice ▶ ▶ ▶ Set./Service Sound Ring volume calls m from the Stand-by display Select “Phone”.
  • Page 33 Using Manner Mode Setting Keypad Sound OFF Just by pressing a key, you can make a tone from the You can silence a Keypad sound for when you press a FOMA terminal such as a ring tone, keypad sound, key. and alarm sound silence.
  • Page 34 ■ ■ Changing the Display Brightness Making Display Hard to Be Seen by the People Around You can set Backlight to OFF. Then the display dims, and the keys turn off. You can also set the time that You can set “View blind” to make it harder for the elapses before Power Saver Mode activates.
  • Page 35 ■ Changing Font Size Using Kisekae Tool You can change font sizes at a time. You can set the ring tone, Stand-by display, menu m from the Stand-by display icons and others at a time. ▶ ▶ Set./Service Display m from the Stand-by display ▶...

  • Page 36: Checking Missed Calls And New Mail

    Changing Illumination Checking Missed Calls and New Mail by Tone and Call/Charging Indicator You can set the pattern of the illuminations such as for incoming calls and talking at a time. With the FOMA terminal closed, you can check for m from the Stand-by display missed calls, new mail and others.

  • Page 37: Lock/Security

    (your copy) that is handed over to you at a docomo Shop at the time of contract. If your 2. Put a check mark for items to be set. contract has been made at a shop other than a docomo 3.

  • Page 38: Network Security Code

    When the PIN1 Code/PIN2 Code Entry display This is a four-digit number required for your identification appears, enter your four- to eight-digit PIN1 code/PIN2 when you place an order for at a docomo Shop, docomo Information Center, or “お客様サポート (User support)” code and press site, or when you use respective network services.

  • Page 39: Various Lock Functions

    You can set your FOMA terminal not in succession, the UIM is locked. In that case contact to be used by a third party. one of docomo Shops. You can do no operations other than answering calls and turning on/off ■...

  • Page 40: Restricting Incoming Calls

    ※Unavailable from some IP phones. ⿠You can set/release also from the My Enter your Terminal Security Code Enter your Terminal Security Code docomo site via your personal computer or ▶ Select a reason for no caller ID. other devices. (In Japanese only)
  • Page 41 Business Online From personal computers ▶ ▶ Set./Service Other settings http://www.docomo.biz/ (in Japanese only) ▶ Reset settings ※You may not be able to access due to system Enter your Terminal Security Code Enter your Terminal Security Code maintenance, etc.

  • Page 42: Call Telephone

    ■ Making a Call from Phonebooks Call Telephone <Example> Search a Phonebook entry by the name Making a Call/Videophone Call stored in Phonebook ■Enter a Phone Number to Make a Call o from the Stand-by display. Press Press From the Stand-by display, enter a From the Stand-by display, enter a phone number starting with a city code.

  • Page 43: Phone Number

    (Received call from Japan. Press Press ⿠Contact “docomo Information Center” on the back page Calls) from the Stand-by display. Calls) from the Stand-by display. of this manual for inquiries about WORLD CALL. ⿠When using international carriers other than DOCOMO, Select a call record.

  • Page 44: Receiving A Call/Videophone Call

    Receiving a Call/Videophone Call When You cannot Answer a Call ■ Activate Record Message A call comes in. A call comes in. By activating Record Message, you can record a The ring tone sounds and the Call/Charging indicator The ring tone sounds and the Call/Charging indicator caller’s voice/video message when you cannot answer lights.
  • Page 45 ■ ■ Using Public Mode (Drive Mode) Using Public Mode (Power Off) Once you activate Public mode (Drive mode), the Once you activate Public mode (Power off), the guidance is played back telling that you cannot guidance is played back for an incoming call while the answer the call as you are currently driving or in a power is off, telling that you cannot answer the call as place where you should refrain from speaking on the...
  • Page 46 ⿠The network services are not available when you are out of the service area or out of reach of radio waves. ⿠For details, refer to “Mobile Phone User’s Guide [Network Services]”. ⿠For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual. Service...

  • Page 47: Using Call Forwarding Service

    ■ ■ Using Voice Mail Service Using Call Waiting Service m from the Stand-by display m from the Stand-by display ▶ ▶ ▶ ▶ Set./Service NW services Set./Service NW services ▶ ▶ Voice mail Call waiting Activate the service Activate the service ▶...

  • Page 48: Services Available For Foma Terminal

    Services Available for FOMA Terminal Available services Phone number Available services Phone number Directory assistance service Emergency calls to police (No prefix) 110 (Charges apply: guidance fee + call fee) (No prefix) 104 Emergency calls to fire station and (No prefix) 119 ※Listed phone numbers only are supported.

  • Page 49: Available Services Overseas

    Japan, in a service ※3 ○ ー ○ i-mode area of the overseas carrier partnered with DOCOMO. It ○ ー ○ i-mode mail enables you to continue using the voice call, SMS and ※3※4...

  • Page 50: Mail

    ■Make a Call to Outside the Country Mail You Stay at Sending i-mode Mail 0 (for at least one second) from the ▶ Stand-by display Stand-by display Enter numbers in Once you subscribe to i-mode, you can exchange e-mail order of country/area code→area code messages over the Internet.
  • Page 51 Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or You can create impressive messages by inserting text background color, or insert images or Deco-mail or images into a Flash fi le. pictograms. 1 1 1 1 l from the Stand-by display l from the Stand-by display ▶...
  • Page 52 ■ Replying to i-mode Mail Displaying Received i-mode Mail Press Press ) while an i-mode mail ▶ l from the Stand-by display Inbox is displayed. is displayed. Enter each item. Enter each item. Select a folder. Select a folder. Press Press Select an i-mode mail message.
  • Page 53 ■ ■ Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail You can use “Auto-sort” to sort received/sent i-mode message or Message R/F. mail messages into a folder such as “Business” or “Friend”...

  • Page 54: Using Sms

    Early Warning “ Area Mail” Using SMS ■Receiving Area Mail You can send text messages to the mobile phone number at the other end. You can receive information such as about earthquake ■Sending SMS alerts that are issued from the Japan Meteorological Agency as an Area Mail message.

  • Page 55: Phonebook

    ■Displaying Received SMS Message Phonebook ▶ l from the Stand-by display Inbox Storing Phonebook Entries ■Storing New Phone Numbers/Mail Select a folder. Select a folder. Addresses o for at least one Press and hold Press and hold second from the Stand-by display. second from the Stand-by display.

  • Page 56: Editing Phonebook Entries

    ■Storing Phonebook Entries from Editing Phonebook Entries Redial/Received Call Records o from the Stand-by display o (Redial) or o (Received Press Press ▶ Search and select a Phonebook entry. Calls) from the Stand-by display. Calls) from the Stand-by display. Highlight a call record and press Highlight a call record and press ▶...

  • Page 57: I-Mode/Full Browser

    i-mode/Full Browser ■Before using i-mode ⿠Content of sites or websites is in general protected Displaying i-mode Sites by copyrights law. You can use data such as text and images for your entertainment, which you download i-mode is a service that enables you, by using the to your i-mode phone, but you cannot use them, part display of the FOMA terminal supporting i-mode or whole of it as is, or modify them for the purpose of...
  • Page 58 Displaying Websites Designed for Switching Browsers You can switch to Full Browser to show the Internet websites incorrectly displayed by i-mode. You can browse Internet websites designed for PCs ⿠The billing system differs between i-mode and Full using the Full Browser function. Browser.

  • Page 59: Saving Site Content

    Viewing and Operating Sites Saving Site Content Operations on site viewing display If you save the page once you visited as a screen memo, you can easily refer to it without connecting to i-mode. Scroll display/Move highlighted/ Move the pointer: + ) while the site is displayed ▶...

  • Page 60: I-Channel

    Further, two types of channels, “Basic channel” provided ⿠Note that we do not take any responsibility for a by DOCOMO and “Favorite channel” provided by IPs loss such as pure economic loss resulting from the (Information Providers) are available. You are not charged facts that you have missed the chance to check the a packet communication fee for auto-updates of “Basic...
  • Page 61 ■ ■ Checking Your Location Reading Map You can pinpoint your current location by positioning, You can start GPS compatible i-αppli, and you can and display the location information. You can also read a map of current or specifi ed location. display a map using the location information and ⿠At purchase, “地図アプリ...

  • Page 62: Camera

    Camera Viewing and Operating Finder Display Menu Image stabilizer You can check the settings. : Auto Select photo mode : intelligent Auto Continuous setting Image size setting : 1 image : 2M Wide (1080×1920) Number of recordable image Image quality setting Shows the number of remaining recordable : Super fi ne still images.
  • Page 63 Shooting Still Images/Moving Pictures Viewing Still Images/ Moving Pictures after Shooting ■Shooting Still Images ( Digicam Mode) You can shoot still images within the sizes from The still image you shot is saved to “My picture” Square (small) (480 x 480) to 13M (3120 x 4160). in Data Box.
  • Page 64 ■ Shooting Still Images Using Auto Shooting Still Images Using Shutter Various Methods The camera automatically shoots identifying the ■ Shooting Still Images Using Omakase number of faces and the distance between faces by Choice face recognition. You can shoot 8 still images in succession. The FOMA <Example>...

  • Page 65: 1Seg

    1Seg Using 1Seg ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).

  • Page 66: Setting Channels

    Setting Channels Watching 1Seg When you activate 1Seg for the fi rst time or change c for Press and hold the area you are in, you need to operate “Channel at least one second from setting”. Select “Auto channel setting” to enable you the Stand-by display.
  • Page 67 Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Program Information (outline) Video being recorded Video Switch Display/Caption Caption Data Displayed while receiving caption Broadcasting information Sound Volume Operation Mode Airwave Reception Level (estimate) : Video Mode 　...
  • Page 68 Setting Timer for Watching or Playing Recorded Video Recording 1Seg Programs m from the Stand-by display ▶ ▶ Set the date and time, a channel, and program name, and Data box 1Seg enter them to the TV Timer List or Timer Recording List. ▶...

  • Page 69: Music

    Music Setting Programs ▶ m from the Stand-by display MUSIC Music&Video Channel ▶ ▶ Music&Video Channel Set program Music&Video Channel is a service which automatically Follow the instructions on the display Follow the instructions on the display delivers up to about one-hour programs at night just by selecting your favorite music programs in advance.

  • Page 70: Playing Music Files

    ® Downloading Chaku-uta Full Playing Music Files Music Files ® MUSIC Player enables you to play Chaku-uta Full music fi les you have downloaded from sites, or to ® You can download Chaku-uta Full music fi les from ® play Windows Media Audio (WMA) fi les you saved on sites.

  • Page 71: I-Αppli/I-Widget

    i- α ppli/ i-Widget Starting i-αppli i for at least one Press and hold Press and hold second from the Stand-by display. second from the Stand-by display. “i-αppli” is a software program for i-mode mobile phones. By downloading various software programs from the i-mode site, you can use your FOMA terminal more Select a software Select a software...
  • Page 72 Downloading i-αppli from Sites ⿠You can delete the pre-installed i-αppli programs except for the “ケータイTOOL＜辞書＞ (KEITAI Select a software program from Select a software program from TOOL Dictionary)”. You can re-download deleted downloadable site. downloadable site. programs from the “P-SQUARE” site. You can download not only i-αppli Select “OK”...

  • Page 73: I-Motion/Movie

    i-motion/ Movie Downloading i-motion/Movie Select an i-motion/movie fi le from an Select an i-motion/movie fi le from an i-motion is a fi le consisting from video, audio, and i-motion/movie downloadable site. i-motion/movie downloadable site. music which you can download to your FOMA terminal from i-motion sites that support i-motion.

  • Page 74: Osaifu-Keitai

    Osaifu-Keitai Osaifu-Keitai/ ToruCa Osaifu-Keitai is equipped with the IC card so that you can make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.

  • Page 75: I-Concier

    Phonebook. It also allows you to share the schedules or images held by the DOCOMO’s Data Storage Center with friends, family members or other groups. It also enables you to easily Select a message.

  • Page 76: Convenient Tools

    Convenient Tools Using Alarm m from the Stand-by display Using Schedule ▶ ▶ Stationery Alarm m from the Stand-by ▶ display display Stationery Highlight an alarm and press Highlight an alarm and press ▶ Schedule Select a date to show a schedule Enter each item.
  • Page 77 QR code is one of the 2-dimensional codes that denotes data in the vertical Select the URL Select the URL and horizontal directions. ▶ Select “i-mode Browser” ⿠“株式会社NTTドコモ (NTT DOCOMO, ▶ Select “YES”. INC.)” is displayed when you scan the QR code with the FOMA terminal.
  • Page 78 ■Connect the Bluetooth Device Bluetooth Function ▶ m from the Stand-by display LifeKit You can connect your FOMA terminal to a Bluetooth ▶ ▶ Bluetooth Device list device such as Wireless Earphone Set 02 (option), and can talk on the phone or play music fi les. ■Register a Bluetooth Device to the Select a Bluetooth device Select a Bluetooth device...

  • Page 79: Data Management

    If you do not have a microSD card, you need to purchase ⿠Push it until it clicks. ⿠P-04B supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of April 2010).
  • Page 80 When you use the microSD card for the fi rst time, you need to format (initialize) it. ⿠Be sure to use P-04B for formatting. The microSD card formatted using other devices such as personal : A microSD card is inserted.
  • Page 81 ■ ■Displaying Data Stored on the microSD Copying Data to the microSD Card Card <Example> Copying a still image <Example> Displaying still image m from the Stand-by display m from the Stand-by display ▶ ▶ Data box My picture ▶ ▶...

  • Page 82: Microsd Card

    ■ Back up Data to the microSD Card Sending/Receiving Data by Infrared Communication/ iC Communication You can back up Phonebook entries, schedule events, ToDo items, messages, text memos, and You can send or receive data such as Phonebook bookmarks, and the settings on and information entries to or from a device supporting the infrared about your FOMA terminal collectively onto the communication function or iC communication function.
  • Page 83 ■Sending Data Connectting to Personal Computer ⿠For infrared communications, set the receiving end terminal You can connect the FOMA terminal to a personal fi rst, and then start sending data within 30 seconds. computer to exchange WMA fi les, images or other fi les stored on microSD card.

  • Page 84: Support

    …When you use the desktop holder, make sure the connector DOCOMO. terminal of the FOMA terminal is not stained. If it is stained, wipe the terminal part with a dry cotton swab, etc.
  • Page 85 The usable time of the battery is short. Cannot talk. …Make sure not to leave the FOMA terminal out-of-service-area for (“ ” does not disappear even if you move to another place. You cannot make or receive a call, though the radio wave a long time.
  • Page 86 DOCOMO reject to is charged even within the warranty period. repair the malfunction.
  • Page 87 ⿠The information such as about function settings and Total i-mode Fault Diagnosis Site Calls Duration, etc. might be reset depending on the troubles or repairs, or the way you handle the FOMA terminal. Set the You can check on your FOMA terminal whether settings again.

  • Page 88: Updating Software

    ⿠When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.) is automatically sent to the server (DOCOMO-managed server for Software Update). We at DOCOMO never use the sent information for purposes other than to update software programs.
  • Page 89 ■ ■Start Software Update from Menu Start Software Update from Icon m from the Stand-by display Select “Update notifi cation icon” on the Select “Update notifi cation icon” on the Stand-by display. Stand-by display. ▶ ▶ Set./Service Other settings ▶ Software update Enter your Terminal Enter your Terminal...
  • Page 90 FOMA terminal, or when no virus pattern data supporting them is found, this function is disabled to prevent troubles from occurring. ⿠The virus pattern data installed on the FOMA terminal differs in content by every model. Note that we at DOCOMO might stop to distribute the virus pattern data for models on market for last three years since their release.

  • Page 91: Introduction Of Options And Related Devices

    Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.

  • Page 92: Appendix

    Appendix Attachment preference Auto-start attachment Address/Spam Mail set. Function List Mail settings Feel＊Mail Execute “Resetting the Function Settings” on page Auto save setting 39 for the items indicated by , to return to the Text predict respective defaults. Check settings SMS report request Inbox SMS validity period...
  • Page 93 i-mode Browser set. Select ring tone ( Full Browser set. Ring volume ( i-mode settings Common settings Keypad sound ( Check settings Sound Melody effect ( Reset i-mode setting Headset usage setting ( Full Browser Home Mail/Msg. ring time ( Charge sound Software list (phone) Display setting (...
  • Page 94 MUSIC illumination Answer setting ( Bluetooth illumination Setting when opened Illumination IC card illumination Record display set Check settings Disp. PH-book image Kisekae Set call/receive No. Incoming call i-concier Information disp. set. Ring time ( Self mode Info notice setting ( Lock all V.phone while packet Personal data lock...
  • Page 95 NW services Overseas NW search Machi-chara Overseas setting Chara-den Image Overseas service Additional service 1Seg Video Contact DOCOMO Position memory OFFICEED Document viewer Font Chaku-moji Work with style SD other fi les Side keys guard Scan code 録画 long press set.
  • Page 96 Device list Phone Add to phonebook Register New Devices Reading? Activate Bluetooth/Bluetooth power OFF Bluetooth Accept registered Group? Accept dialup devices Memory No.? Bluetooth settings Search phonebook Name? Phone number? imadoco search Mail address? imadoco kantan search 2-touch dial? Copy i-area UIM operation Map/GPS αppli...
  • Page 97 Alarm ( Reset channel setting Schedule ( Reset storage area User settings ToDo ( Reset TV settings Text memo ( Check TV settings Calculator ( IC card content Dictionary DCMX Common phrases ToruCa Phrase/own dict. Own dictionary IC card lock IC card lock set.

  • Page 98: Main Specifications

    Camera Number of Approx. 13,200,000 pixels effective pixels ■Handset Number of recording Approx. 13,000,000 pixels pixels (maximum) Model P-04B Recording Number of Approx. 2,400 max. (default) Dimensions (when closed) Height: Approx. 111 mm recordable still Width: Approx. 50 mm ※1 images Depth: Approx.
  • Page 99 Schedule 2,500 File format (Extension) MP4, ASF (3gp, asf) ※1※2 Mail Received mail 2,500 max. ※1※3 Recordable time to P-04B Approx. 497 seconds max. ※2 Sent mail 1,000 max. ※4 Recordable time to the microSD Approx. 180 minutes max. ※2 Still image 3,500 max.

  • Page 100: Sar Certification Information

    ■SAR Certification Information TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO: http://www.nttdocomo.co.jp/english/product/sar/ This model phone P-04B meets the MIC’s* technical regulation for Panasonic Mobile Communications Co., Ltd.: http://panasonic.jp/mobile/ exposure to radio waves. (In Japanese only) The technical regulation established permitted levels of radio...

  • Page 101: Declaration Of Conformity

    Conformity can be found on http://panasonic.net/pmc/support/index.html. permitted levels of RF energy for the general population. The guidelines are based ※The European RTTE approval of this product is limited to the use of the P-04B on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.

  • Page 102: Important Safety Information

    ■Important Safety Information Export Administration Regulations AIRCRAFT This product and its accessories might be covered by the Japan Switch off your wireless device when boarding an aircraft or whenever you are Export Administration Regulations (“Foreign Exchange and Foreign instructed to do so by airline staff. If your device offers a ‘flight mode’ or similar feature consult airline staff as to whether it can be used on board.

  • Page 103: Intellectual Property Right

    PRIME series”, and the logos of “FOMA”, “i-mode”, “i-αppli”, “iC”, and “Music&Video registered trademarks of those companies. Channel” are trademarks or registered trademarks of NTT DOCOMO, INC. ■Others ⿠“Catch Phone (Call waiting service)” is a registered trademark of Nippon Telegraph and Telephone Corporation.
  • Page 104 Bluetooth SIG, Inc. and any use Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade new licenses to copy, display and/or play Secure Content. Revocation does not alter names are those of their respective owners.

  • Page 105: Index

    Index Camera ........5, 60 Shooting still images/moving AC adapter ........19 Early warning “Area Mail” ... 52 pictures ........61 After-sales services ..... 84 Earphone ........4 Viewing still images/moving Alarm ..........74 Earpiece .......... 4 pictures after shooting ....61 Antenna ..........
  • Page 106 International calls ......41 Inserting/removing ..... 77 International roaming ....47 Movie ..........71 Holding ......... 40 i-Widget ........69 Movie mode ........61 Hook for horizontal open style ..4 Movie player ......... 71 Horizontal open menu ....26 MUSIC player .......
  • Page 107 PC connection ......81 Record message ......42 Personal data lock ....... 38 Redial ..........41 Terminal security code ....36 Phonebook Reject unknown ......38 Timer recording ......66 Remote reset ........ 39 Add to phonebook ...... 53 ToruCa .......... 72 Delete data .........
  • Page 108 My docomo (http://www.mydocomo.com/) ⿠“お客様サポート (User support)” and My docomo are available in Japanese only. ⿠If you do not have or you have forgotten your “network ID” or “docomo ID/password”, ⿠You will need your “network ID” for the access from i-mode.
  • Page 109 ● Please confi rm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site.
  • Page 110 Installing DOCOMO Connection Manager........

  • Page 111: Data Communication Available From Foma Terminal

    FOMA terminal to an access point which does not support HIGH-SPEED or the terminal is outside the FOMA High-Speed Area, or when you use the device which does not support High-Speed such as DOCOMO’s PDA “sigmarion Ⅲ”. ≥The packet communication is charged according to the amount of data you sent and received. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data files.

  • Page 112: Before Using Data Communication

    ≥The FOMA terminal does not support Remote Wakeup. ≥The FOMA terminal does not support the FAX communication. ≥You can perform data communications by connecting the FOMA terminal with DOCOMO’s PDA “sigmarion Ⅲ”. Before Using Data Communication Charge of Internet service provider To use the Internet, you need to pay the charge for the Internet service provider you use.

  • Page 113: Operating Environment

    Hard disk space size ≥Unused memory space of 10 Mbytes or more for “DOCOMO Connection Manager” ≥For the latest information about the operating environment, refer to the DOCOMO website. ≥The operation on the upgraded OS is not guaranteed. ≥The memory requirements and hard disk space size may vary depending on the system environment.
  • Page 114 Connect FOMA Terminal to Other Devices The following three ways are available for connecting the FOMA terminal to another device: Use FOMA USB Cable with Charge Function 01/02 Connect the FOMA terminal to a personal computer provided with the USB port using the FOMA USB Cable with Charge Function 01/02 (option).

  • Page 115: Setup Flow For Data Transfer (Obex™ Communication)

    Charge Function 01/02, install the “FOMA communication configuration file” (driver) from the provided “P-04B CD-ROM” onto the personal computer. You are advised to install “DOCOMO Connection Manager” which enables you to easily set up the APN or dial-up for communication.
  • Page 116 Connecting PC and the FOMA Terminal The following steps explain how to connect the FOMA USB Cable with Charge Function 01/02 (option). Check the direction of the Connector terminal connector terminal of the FOMA External connector terminal, then straight insert the (Face up the engraved external connector of the FOMA surface of the connector...

  • Page 117: Installing Foma Communication Configuration File (Driver)

    ≥Operate as the user who has the PC administrator right. ≥End all the programs resident on your personal computer before installing the FOMA communication configuration file (driver). Start Windows, then set the provided “P-04B CD-ROM” into the personal computer. Click “データリンクソフト・各種設...
  • Page 118 For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “docomo PRIME series P-04B” 1Click the “ハードウェア (Hardware)” tab. Confirm the installed driver names. Confirm that all driver names are displayed. ≥The COM port number varies depending on the personal...
  • Page 119 For Windows Vista, Windows XP “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Open “システムとメンテナンス (System and maintenance)”. <For Windows XP> “スタート (Start)”→Open “コントロールパネル (Control panel)” →“パフォーマンスとメンテナンス (Performance and maintenance)”→Open “システム (System)”. Open “ハードウェアとデバイスを表示 (Show hardwares and devices)” 1Click “続行 (Continue)”. <For Windows XP> Click the “ハードウェア...
  • Page 120 “FOMA communication configuration file” (driver), the “FOMA communication configuration file” (driver) may not be installed correctly. In that case, execute “P04B_un.exe” on “P-04B CD-ROM” to delete the “FOMA communication ※ configuration file” (driver), and then install the files again.

  • Page 121: Preparing Bluetooth Communication

    < Dial-up Communication Service > Preparing Bluetooth Communication You can make data communication by connecting a Bluetooth communication compatible personal computer wirelessly to your FOMA terminal. Connect to Personal Computer for the First Time To connect a personal computer to the FOMA terminal for the first time, register the personal computer to the FOMA terminal.
  • Page 122 For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “docomo PRIME series P-04B” 1Click the “ハードウェア (Hardware)” tab. Confirm the modem name or COM port number. For Windows Vista, Windows XP “ [スタート (Start)]”1Open “コントロールパネル (Control panel)”...

  • Page 123: Docomo Connection Manager

    DOCOMO Connection Manager “DOCOMO Connection Manager” is a convenient software program to perform flat-rate data communication and volume charging data communication. It enables you to sign up for “mopera U” and easily make PC settings according to your contract situation.

  • Page 124: Before Installing Docomo Connection Manager

    FOMA USB Cable (option). Check the service contents and the contract contents with Internet service provider. When a connection software program other than “DOCOMO Connection Manager” is installed, set it not to start automatically. ≥See page 14 for using communication software other than “DOCOMO Connection Manager”.

  • Page 125: Installing Docomo Connection Manager

    When MSXML6 and Wireless LAN API are not installed on the Windows XP environment, you need to install them before installing “DOCOMO Connection Manager”. When a confirmation display appears, click “Install” and install MSXML6/Wireless LAN API. When you restart Windows after installation of MSXML6/Wireless LAN API is completed, installation of “DOCOMO Connection Manager” automatically starts.
  • Page 126 Click “次へ (Next)”. Confirm the display precautions and click “次へ (Next)”. Confirm the licensing contract contents. If you agree with the contents, select “使用許諾契約の条 項に同意します (Agree with the licensing contract contents)” and click “次へ (Next)”. Confirm the installation destination folder, then click “次へ...
  • Page 127 Click “インストール (Install)”. Installation starts. Click “完了 (Finish)”. Installation is completed.

  • Page 128: Starting Docomo Connection Manager

    When this is the first start-up, the setting wizard appears automatically. Hereafter, proceed operation/settings following the instruction of software to complete the preparation to access the Internet. For details, refer to “ドコモ コネクションマネージャ操作マニュアル.pdf (DOCOMO Connection Manager operation manual by PDF format)”.

  • Page 129: Setting Dial-Up Network

    AT command is required. “Hyper Terminal”, which is attached to Windows as the standard software, is used here for explanation. When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN) (see page 22).
  • Page 130 (driver). The confirmation method varies depending on the operating system of your personal computer. ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN); therefore, you do not need to confirm the modem.
  • Page 131 Open the “モデム (Modem)” tab, confirm the COM port number in the “接続先 (Access point)” field of “FOMA P04B”, then click “OK”. ≥When connecting wirelessly using Bluetooth communication, confirm the COM port number of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker in the “接続先...
  • Page 132 Set an Access Point Name (APN) This section explains how to set an access point name (APN) for packet communication. You can register up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 24). When using “mopera U”...
  • Page 133 Select a connection method. <When you can select the COM port number of “FOMA P04B”> Select the COM port number with which you install the “FOMA P04B” in the “接続方法 (Connection method)” field, then click “OK”. Then, go to step 6. ≥Here, “COM3”...
  • Page 134 Confirm that “OK” appears on the display. “ファイル (File)” menu1Select “ハイパーターミナルの終了 (Exit Hyper Terminal)” to exit Hyper Terminal. ≥If the message “現在、接続されています。切断してもよろしいですか? (Currently connected. Do you want to disconnect this line?”) appears, select “はい (Yes)”. ≥The message “セッションXXXを保存しますか? (Do you want to save session XXX?)” then appears. You do not need to especially save that session.
  • Page 135 Confirm that “OK” appears on the display. Information ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”. ≥If the entered AT command is not displayed, enter “ATE1 ”. ■Specifying “caller ID notified/not notified” in dial-up network Also by dial-up network setting (see page 28), you can add “186 (notify)”...
  • Page 136 Set Dial-up Network for Windows 7 “ [スタート (Start)]” 1Open “コントロールパネル (Control panel)” 1“インターネットへの接続 (Connection to Internet)” 1Click “ダイヤルアップ接続 (Dial-up connection)”. ≥After the access point has been set, the confirmation display appears asking whether the existing connection is to be used.
  • Page 137 Highlight the access point which is finished with setting, and select “プロパティ (Property)” after the right click 1Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P04B” or “モデム...
  • Page 138 Set Dial-up Network for Windows Vista “ [スタート (Start)]”1“接続先 (Access point)”1Click “接続または ネットワークをセットアップします (Setup the connection or network)”. Select “ダイヤルアップ接続を セットアップします (Setup the dial-up connection)”, then click “次へ (Next)”. If the display for selecting a modem appears, click “FOMA P04B”. ≥When connecting wirelessly using Bluetooth communication, put a check mark for only the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker.
  • Page 139 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P04B” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...
  • Page 140 Set Dial-up Network for Windows XP “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “新しい接続ウィザード (New connection wizard)”. When the “新しい接続ウィザード (New connection wizard)” display appears, click “次へ (Next)”. Select “インターネットに接続する (Connect to the Internet)”, then click “次へ (Next)”. Select “接続を手動でセットアップする (Manually set up the connection)”, then click “次へ...
  • Page 141 Enter an access point number in the “電話番号 (Phone number)” field, then click “次へ (Next)”. ≥When connecting to “mopera U”, enter “¢99¢¢¢3#” as the access point number. See page 24 for access point numbers other than “mopera U”. Enter the user name and password supplied from your Internet service provider or network administrator in the...
  • Page 142 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P04B” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...

  • Page 143: Making Dial-Up Connection

    Making Dial-up Connection Making Dial-up Connection for Windows 7 Perform the operation on page 6 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Click “インターネットへの接続 (Connection to Internet)”. Check “はい、既存の接続を選びま す (Yes, I choose the existing connection)”, then select the access point, and click “次へ...
  • Page 144 Making Dial-up Connection for Windows Vista Perform the operation on page 6 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “接続先 (Access point)”. Select access point and click “接続 (Connect)”. Confirm the contents and click “ダイヤル (Dial)”. ≥When connecting to “mopera U”...
  • Page 145 Making Dial-up Connection for Windows XP Perform the operation on page 6 to connect the FOMA terminal to your personal computer. “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “ネットワーク接続 (Network connection)”. Open the access point to be used. Select the access point icon of the ISP name (see page 30) you specified in “Set Dial-up Network”, then “ネットワークタ...

  • Page 146: Connecting And Disconnecting

    Your personal computer ･ Confirm whether your personal computer satisfies the operating environment (see page 3). cannot recognize “P-04B” ･ Confirm whether “FOMA communication configuration file” (driver) is installed in your personal computer. ･ Confirm whether the FOMA terminal is connected to your personal computer and powered on.

  • Page 147: At Command

    AT Command AT commands are used to specify and modify the functions of the FOMA terminal through the personal computer. ※The following abbreviations are used in the AT command list: [AT]: Commands which are available at the FOMA P04B Command Port. [M]: Commands which are available in the FOMA P04B (modem).

  • Page 148: At Command List

    AT Command List Command execution AT command Outline Parameter/Explanation example Re-executes the last executed − command. No carriage return is required. AT%V Displays the version of the AT%V − FOMA terminal. Ver1.00 AT&Cn Selects the operating conditions n=0: CD is always ON. AT&C1 of the circuit CD signal sent to n=1: CD varies according to the carrier of the other...
  • Page 149 Command execution AT command Outline Parameter/Explanation example AT¢DGPIR=n This command is valid at dialing/ n=0: Uses the APN as it is. (default) AT¢DGPIR=0 receiving calls. n=1: Adds “184” to the APN. (always not notify) In the dial-up network setting, n=2: Adds “186” to the APN. (always notify) AT¢DGPIR? you can add “186”...
  • Page 150 Command execution AT command Outline Parameter/Explanation example AT+CGREG=n Sets whether the network n=0: Not notified. (default) AT+CGREG=1 registration state is notified. n=1: Notified at switching between the inside and Displays whether you are inside outside of the service area. (set to “Notified”) or outside the service area (Inquiry) AT+CGREG?
  • Page 151 Command execution AT command Outline Parameter/Explanation example AT+COPS=n,2,m Selects the carrier to be n=0: Automatic (searches the network and switches the AT+COPS=1,2,"44F001" connected. network operator automatically) (default) n=1: Manual (connects to the network operator specified in “m”) n=2: Disconnects the connection to the network operator n=3: Mapping is not performed.
  • Page 152 AT+GMI Displays the manufacturer name AT+GMI − (Panasonic). Panasonic AT+GMM Displays the product name AT+GMM − (FOMA P-04B) of the FOMA FOMA P04B terminal. AT+GMR Displays the version of the AT+GMR − FOMA terminal. Ver1.00 AT+IFC=n,m Selects the flow control method. n: DCE by DTE...
  • Page 153 Command execution AT command Outline Parameter/Explanation example ATIn Displays the ID code. n=0: Displays “NTT DoCoMo”. ATI0 n=1: Displays the product name. (same as +GMM) NTT DoCoMo n=2: Displays the version of the FOMA terminal. (same as +GMR) ATI1 n=3: Displays ACMP information element.
  • Page 154 Command execution AT command Outline Parameter/Explanation example ATZn Resets the setting to the Only n=0 is specifiable. (Can be omitted) (In online) contents of the nonvolatile memory. If this command is NO CARRIER entered during communication, (In offline) the line is disconnected. AT¥Sn Displays the contents of the each Only n=0 is specifiable.
  • Page 155 ≥Command name: +CGEQMIN=[parameter] ･ Outline This command registers the reference value to judge whether the system permits QoS (Quality of service) reported from the network at establishment of the packet communication. You can specify four setting patterns described in the command execution example below. ･...

  • Page 156: Result Codes

    Disconnection Reason List ■64K Data Communication Value Reason The specified number does not exist. The line was normally disconnected. Cannot communicate because the other party is communicating. Dialed but no response has come in within the specified duration. Cannot communicate because the other party is dialing. The other party rejected to receive the call.
  • Page 157 For &E1 Numeric Character notation Connection speed notation CONNECT 1200 1,200bps CONNECT 2400 2,400bps CONNECT 4800 4,800bps CONNECT 7200 7,200bps CONNECT 9600 9,600bps CONNECT 14400 14,400bps CONNECT 19200 19,200bps CONNECT 38400 38,400bps CONNECT 57600 57,600bps CONNECT 115200 115,200bps CONNECT 230400 230,400bps CONNECT 460800 460,800bps...
  • Page 158 P-04B Kuten Code List...
  • Page 159 <How to read Kuten Code List> First enter the number for “Kuten digit 1 to 3”, and enter the number for “Kuten digit 4”. ≥Some characters in Kuten Code List may appear different on the display. Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit...
  • Page 160 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 讃 賛 酸 餐 斬 暫 残 【 た 】 函 箱 硲 箸 肇 筈 櫨 幡 肌 【...
  • Page 161 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 揚 揺 擁 曜 楊 様 洋 溶 熔 用 圷 圸 坎 圻 址 坏 坩 埀 垈 坡 椢...
  • Page 162 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 竊 竍 竏 竕 竓 站 竚 竝 竡 竢 誨 誡 誑 誥 誦 誚 誣 諄 諍 諂 鷯...

Table of Contents