Changing Display Settings - Docomo P-01H Instruction Manual

Setting Keypad Sound OFF
1
m
▶ Setting ▶
▶ Other sound setting
▶ OFF

Changing Display Settings

Changing Stand-by display
1
m
▶ Setting ▶
▶ Stand-by display
▶ Select a type of image
▶ Select an image.
⿠You may be able to select a display format depending
on the image.
Changing Display Brightness
You can adjust the brightness of the display. You can also
set to automatically adjust the display brightness according
to the ambient light.
1
m
▶ ▶
Setting
▶ ▶
Backlight
o to adjust the brightness. B
▶
Press
34
Sound/Vib./Manner
▶ Keypad sound
Screen/Display
▶ Stand-by display
▶ Select a folder
Backlight/Illum.
▶
Brightness ON
Lighting off/Power Saver Mode
You can set the display brightness to OFF. You can also set
the time that elapses before Power Saver Mode activates.
Power Saver Mode activates when the time set for "Time
to saver" has elapsed without any operations on the
FOMA terminal. The display turns off to reduce battery
consumption.
1. m
▶ Setting ▶ Backlight/Illum.
▶ OFF ▶ Enter the time (seconds) for "Time to saver".
Making Display Easy to See Outdoors
In order to see the display clearly in sunlight for outdoor use,
you can set "Outdoor mode".
⿠You can set "Outdoor mode" of "Btn fnc. ON/OFF set." to
"Valid" in advance. (See page 36)
1
Press and hold 7 for at least one
second.
" " appears.
To release
Perform the same operation.
⿠"Outdoor mode" have been registered in E at purchase.
To set/release "Outdoor mode" also by pressing E.
▶ Backlight ▶ Lighting