System Fan - HP ProLiant ML30 Gen9 Maintenance And Service Manual

Access the bottom of the server and push the latches inwards to release the holders.
7.
Remove the Smart Storage Battery holders.
8.
To replace the component, reverse the removal procedure.

System fan

CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the bezel
3.
("Unlock and remove the bezel" on page 26).
Removal and replacement procedures 42