HP ProLiant ML30 Gen9 Maintenance And Service Manual page 48

Remove the access panel
4.
Remove the air baffle
5.
Remove the heatsink ("Heatsink" on page 45).
6.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
CAUTION: The pins on the processor socket are very fragile. Any damage to them may
require replacing the system board.
Open the processor locking lever, and then open the processor retaining bracket.
7.
Grasp the processor by the edges, and then lift it out of the socket.
8.
To replace the component:
CAUTION: Failure to completely open the processor locking lever prevents the processor
from seating during installation, leading to hardware damage.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY
DAMAGED. To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Do not tilt or slide the processor when lowering the processor into the socket.
("Removing the access
("Air baffle" on page 28).
panel" on page 26).
Removal and replacement procedures 48