Diagnostic Tools; Product Quickspecs; Hpe Ilo; Active Health System - HP ProLiant ML30 Gen9 Maintenance And Service Manual

Diagnostic tools

Product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).

HPE iLO

iLO is a remote server management processor embedded on the system boards of HPE ProLiant and
Synergy servers. iLO enables the monitoring and controlling of servers from remote locations. HPE iLO
management is a powerful tool that provides multiple ways to configure, update, monitor, and repair
servers remotely. iLO (Standard) comes preconfigured on HPE servers without an additional cost or
license.
Features that enhance server administrator productivity are licensed. For more information, see the iLO
documentation on the Hewlett Packard Enterprise website (http://www.hpe.com/info/ilo-docs).

Active Health System

The Active Health System monitors and records changes in the server hardware and system
configuration.
The Active Health System provides:
•
Continuous health monitoring of over 1600 system parameters
•
Logging of all configuration changes
•
Consolidated health and service alerts with precise time stamps
•
Agentless monitoring that does not affect application performance
The Agentless Management Service is available in the SPP, which can be downloaded from the Hewlett
Packard Enterprise website (http://www.hpe.com/servers/spp/download). The Active Health System
log can be downloaded manually from iLO 4 or Intelligent Provisioning and sent to Hewlett Packard
Enterprise.
For more information, see the following documents:
•
iLO User Guide on the Hewlett Packard Enterprise website (http://www.hpe.com/info/ilo/docs)
•
Intelligent Provisioning User Guide on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/intelligentprovisioning/docs)

HPE ProLiant Pre-boot Health Summary

If the server will not start up, you can use iLO to display diagnostic information on an external monitor.
This feature is supported on servers that support external video and have a UID button or an SUV
connector. When power is available to the server but the server is not powered on, iLO runs on auxiliary
power and can take control of the server video adapter to display the HPE ProLiant Pre-boot Health
Summary.
For additional information, see the following documents:
Diagnostic tools 63