Emerson CF380SW00 Owner's Manual page 6

3. Ceiling Fan Assembly
3.4
Remove and retain one of the three #8-32 x 12mm switch
housing plate screws from the switch housing hub (Figure
4). Retain for future use.
Loosen the other two switch housing plate screws, three or
four turns.
3.5
Position the switch housing adapter on the switch housing
hub so that the two screws mate with the two keyhole slots
in the switch housing adapter (Figure 5).
Rotate the switch housing adapter clockwise to engage
switch housing plate screws.
Reinstall the previous removed #8-32 x 12mm switch
housing plate screw.
Tighten the three #8-32 x 12mm switch housing plate
screws to secure the switch housing adapter.
A spare #8-32 x 12mm switch housing plate screw in parts
bag, if needed.
3.6
Engage the connector of the switch housing assembly with
the motor connector (Figure 6).
The two connectors are keyed and color-coded and must
be mated correctly (color-to-color) before they can be
engaged.
Make sure the connector latch closes properly.
(Continued)
REMOVE AND RETAIN
#8-32 x 12mm SWITCH HOUSING
PLATE SCREW
SWITCH
HOUSING HUB
LOOSEN TWO
#8-32 x 12mm SWITCH
HOUSING PLATE SCREWS
Figure 4
SWITCH HOUSING PLATE
TIGHTEN
#8-32 x 12mm SWITCH
HOUSING PLATE SCREWS (3)
Figure 5
SWITCH HOUSING
ASSEMBLY
SWITCH HOUSING
CONNECTOR
MOTOR CONNECTOR
Figure 6
6
ROTATE CLOCKWISE
U.L. Model No.: CF380