Entering Your Transmitter Id - Dexcom G4 PLATINUM User Manual

2. Press the or
RIGHT
3. Press the or
UP DOWN
4. Press the button to move to the next value.
RIGHT
The date format is YYYY/MM/DD.
5. Press the
SELECT
You might need to reset the receiver's time and date if the rechargeable battery drains. If this happens,
the receiver will alert you and automatically take you to the Time/Date setting screen.

5.2.3 ENTERING YOUR TRANSMITTER ID

Any time you switch to a new transmitter and/or receiver you must enter the transmitter ID into your
receiver. The transmitter ID is a series of 5 numbers and/or letters that can be found in the following
locations:
• On the transmitter box label
• On the bottom of the transmitter
If you cannot find your transmitter ID, please contact Dexcom Technical Support (see Chapter 15, User
Assistance).
You can only set your transmitter ID when you are not in a sensor session. During a sensor session,
"Transmitter ID" will not be an option on the Settings menu.
To enter the transmitter ID follow these steps:
1. From the Settings menu, press the
button.
SELECT
button to highlight each value in the date and time.
SELECT
button to make any changes.
button after choosing "AM" or "PM." You will return to the Settings menu.
or
UP
button to scroll to "Transmitter ID" and press the
DOWN
25