Entering Your Transmitter Id - Dexcom G4 User Manual

HELPFUL HINT:
• You might need to reset the receiver's time and date if the rechargeable
battery is drained. If this happens, you will be alerted and automatically
taken to the time/date setting screen.
2.2.3

ENTERING YOUR TRANSMITTER ID

Any time you switch to a new transmitter and/or receiver (as a replacement
to the transmitter and/or receiver that came in your kit) you must enter the
transmitter ID into your receiver. The transmitter ID is a series of 5 numbers
and/or letters that can be found in the following locations:
• On the outside of the transmitter box label.
• On the bottom of the transmitter.
If you have difficulty locating your transmitter ID, please contact your local
distributor.
HELPFUL HINT:
• You can only set your transmitter ID when you are not in a sensor
session. During a sensor session, "Transmitter ID" will not appear as an
option on the settings menu.
To enter the transmitter ID follow the steps below.
1. From the Settings menu, press the
button to scroll to "Transmitter ID" and press the
SELECT button.
2. Starting with the first number or letter (do not enter
"SN"):
a. Press the UP or DOWN
correct number or letter.
b. Then press the RIGHT
next value and repeat step a. Continue repeating
steps a and b until you have the transmitter ID
displayed.
c. After entering the fifth number or letter, press the
SELECT button. You will return to the settings
menu.
UP or DOWN
button to display to the
button to move to the
Dexcom G4 User's Guide | 29