How And When To Use Bios Setup - Winmate IK70 User Manual

USER MANUAL
CHAPTER 4: UEFI BIOS SETUP
This chapter provides information on how to use BIOS setup, its functions and menu.

4.1 How and When to Use BIOS Setup

To enter the BIOS setup, you need to connect an external USB keyboard, external
monitor and press Del key when the prompt appears on the screen during start up. The
prompt screen shows only few seconds so need press Del key quickly.
IMPORTANT:
Updated BIOS version may be published after the manual released.
Check the latest version of BIOS on the website.
You may need to run BIOS setup utility for reasons listed below:
1. Error message on screen indicates to check BIOS setup
2. Restoring the factory default settings.
3. Modifying the specific hardware specifications
4. Necessity to optimize specifications
BIOS Navigation Keys
The following keys are enabled during POST:
Key Function
Del Enters the BIOS setup menu.
F7 Display the boot menu. Lists all bootable devices that are connected to
the system. With cursor ↑and cursor ↓and by pressing <ENTER>, select
the device used for the boot.
Pause Pressing the [Pause] key stops the POST. Press any other key to resume
the POST.
CHAPTER 4
- 69 -
UEFI BIOS SETUP