Port Enable - TP-Link T2500-28TC User Manual

Choose the menu VLAN→VLAN VPN→VLAN Mapping to load the following page.
The following entries are displayed on this screen:
VLAN Mapping Config

C VLAN:
SP VLAN:
Description:
VLAN Mapping Table

C VLAN Select:
Select:
Operation:

6.7.3 Port Enable

On this page, you can enable the port for the VLAN Mapping function. Only the port is enabled,
can the configured VLAN Mapping function take effect.
Figure 6-13 Create VLAN Mapping Entry
Enter the ID number of the Customer VLAN. C VLAN refers to the
VLAN to which the packet received by switch belongs.
Enter the ID number of the Service Provider VLAN.
Give a description to the VLAN Mapping entry or leave it blank.
Click the Select button to quick-select the corresponding entry
based on the C VLAN ID you entered.
Select the desired entry to delete the corresponding VLAN
Mapping entry. It is multi-optional.
Click the Edit button to modify the settings of the entry and click
the Modify button to apply.
83