Diffserv; Port Priority - TP-Link T2500-28TC User Manual

11.1 DiffServ

This switch classifies the ingress packets, maps the packets to different priority queues and then
forwards the packets according to specified scheduling algorithms to implement QoS function.
This switch implements three priority modes based on port, on 802.1P and on DSCP, and supports
four queue scheduling algorithms. The port priorities are labeled as CoS0, CoS1... CoS7.
The DiffServ function can be implemented on Port Priority, DSCP Priority, 802.1P/CoS Mapping
and Schedule Mode pages.

11.1.1 Port Priority

On this page you can configure the port priority.
Choose the menu QoS→DiffServ→Port Priority to load the following page.
The following entries are displayed on this screen:
Port Priority Config

Select:
Port:
Priority:
LAG:
Note:
To complete QoS function configuration, you have to go to the Schedule Mode page to select a
schedule mode after the configuration is finished on this page.
Figure 11-6 Port Priority Config
Select the desired port to configure its priority. It is multi-optional.
Displays the physical port number of the switch.
Specify the priority for the port.
Displays the LAG number which the port belongs to.
174