TP-Link T2500-28TC User Manual page 249

The following entries are displayed on this screen:
Global Config

PPPoE Circuit-ID
Insertion:
Port Config

Port Select:
Select:
Port:
Port State:
Circuit-ID Type:
UDF Value:
Enable/Disable the PPPoE Circuit-ID Insertion function globally.
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for configuration. It is multi-optional.
Displays the port number.
Enable/Disable the PPPoE Circuit-ID Insertion feature for the
port.
Specify the Circuit-ID type for the port:
• IP: The IP address of the switch will be used to encode the
Circuit-ID option. This is the default value.
• MAC: The MAC address of the switch will be used to encode
the Circuit-ID option.
• UDF: The user specified string with the maximum length of
32 characters will be used to encode the Circuit-ID option.
If the UDF is selected, specify a string with the maximum length
of 32 characters to encode the Circuit-id option.
239
Return to CONTENTS