TP-Link T2500-28TC User Manual page 173

The following entries are displayed on this screen:
VLAN Config

VLAN ID:
Router Port
Time:
Member Port Aging
Time:
Immediate Leave:
Forbidden Router
Ports：
Static Router Ports:
VLAN Table

Select:
VLAN ID:
Router Port
Time:
Member Port Aging
Time:
Immediate Leave:
Static Router Ports:
Dynamic Router
Ports：
Note:
1. The VLAN configuration will take effect when global MLD Snooping function is enabled and the
corresponding VLAN is created.
Figure 10-15 VLAN Config
Enter the VLAN ID you want to configure.
Aging Enter the router port aging time for this VLAN. It will override the
global configured aging time.
Enter the member port aging time for this VLAN. It will override
the global configured aging time.
Enable or disable immediate leave function for this VLAN. If this
function is enabled, the multicast group member port will be
deleted immediately if Done Message receive, not sending
Specific Query for listener checking.
Enter the forbidden router ports for this VLAN. Forbidden router
ports cannot be router ports
Enter the static router ports for this VLAN. Static router ports will
not be aged.
Select the VLAN ID you want to change.
Displays the VLAN ID.
Aging Displays the router port aging time of this VLAN.
Displays the member port aging time of this VLAN.
Displays the immediate leave function of this VLAN.
Displays the static router ports of this VLAN.
Displays the dynamic router ports of this VLAN.
163