TP-Link T2500-28TC User Manual page 258

Configuration Procedure:
If SNMPv3 is employed, please take the following steps:

Step Operation
Enable SNMP function globally.
1
2 Create SNMP View.
3 Create SNMP Group.
4 Create SNMP User.
If SNMPv1 or SNMPv2c is employed, please take the following steps:

Step Operation
1 Enable SNMP function globally.
2 Create SNMP View.
3
Configure
access level
for the User.
Create SNMP
Community
directly.
Create SNMP
Group and SNMP
User.
Description
Required. On the SNMP→SNMP Config→Global
Config page, enable SNMP function globally.
Required. On the SNMP→SNMP Config→SNMP
View page, create SNMP View of the management
agent. The default View Name is viewDefault and the
default OID is 1.
Required. On the SNMP→SNMP Config→SNMP
Group page, create SNMP Group for SNMPv3 and
specify SNMP Views with various access levels for
SNMP Group.
Required. On the SNMP→SNMP Config→SNMP
User page, create SNMP User in the Group and
configure the auth/privacy mode and auth/privacy
password for the User.
Description
Required. On the SNMP→SNMP Config→Global
Config page, enable SNMP function globally.
Required. On the SNMP→SNMP Config→SNMP
View page, create SNMP View of the management
agent. The default View Name is viewDefault and the
default OID is 1.
Required alternatively.
Create SNMP Community directly.

On the SNMP→SNMP Config→SNMP
Community page, create SNMP Community
based on SNMP v1 and SNMP v2c.
Create SNMP Group and SNMP User.

Similar to the configuration way based on
SNMPv3, you can create SNMP Group and
SNMP User of SNMP v1/v2c. The User name
can limit access to the SNMP agent from SNMP
network management station, functioning as a
community name. The users can manage the
device via the Read View, Write View and Notify
View defined in the SNMP Group.
248