Using Intelligent Provisioning
Overview
To access Intelligent Provisioning, power on or reboot the server and press F10 when prompted during
the server POST.
When accessing Intelligent Provisioning, one of the following happens:
•
For first-time Intelligent Provisioning users, onscreen prompts guide you through initial configuration
and registration tasks.(Completing initial configuration and registration tasks on page 7).
•
If Intelligent Provisioning was previously accessed and the initial configuration and registration tasks
are complete, the Intelligent Provisioning home page is displayed. In the home screen, select one of
the following menus to use Intelligent Provisioning:
◦
Configure and Install menu (Configuring the server and installing an OS on page 17)
◦
Perform Maintenance menu (Performing maintenance on page 28)
To exit Intelligent Provisioning, reboot the server by clicking the power icon at the top right of the page.
Navigating Intelligent Provisioning
To navigate through and modify settings in this menu-driven interface, use the navigation icons displayed
at the top right-hand corner and bottom left- and right-hand corners of the Intelligent Provisioning window.
These navigation icons are screen sensitive and are not displayed on all screens.
6
Using Intelligent Provisioning