HP ProLiant Gen8 User Manual page 50

NOTE:
When DNS server locations are configured in both IPv4 and IPv6, both sources are used, with
preference given according to the iLO Client Applications use IPv6 first configuration option, primary
sources, then secondary, and then tertiary.
• Enable DDNS Server Registration—Specify whether iLO registers its IPv4 address and name with a
DNS server.
• Primary WINS Server—Enter the IPv4 address for the primary WINS server.
• Secondary WINS Server—Enter the IPv4 address for the secondary WINS server.
• Enable WINS Server Registration—Select this check box to enable iLO to register the IPv4 address
for the WINS server(s).
• Ping Gateway on Startup—Select this check box to have iLO send request packets to the gateway
when iLO initializes.
To edit the settings on the IPv4 tab:
• In the iLO Configuration Utility window, click Network Settings. The General tab data appears.
• Click the IPv4 tab. The IPv4 tab data appears.
• If you have enabled DHCPv4, uncheck the check box.
• Edit the setting(s) as necessary. Click Apply.
Network Settings–IPv6
• iLO Client Applications use IPv6 first—When both IPv4 and IPv6 service addresses are configured
for iLO client applications, this option specifies which protocol iLO tries first when accessing a client
application. This setting also applies to lists of addresses received from the name resolver when using
FQDNs to configure NTP.
◦ Select this check box if you want iLO to use IPv6 first.
◦ Clear this check box if you want iLO to use IPv4 first.
If communication fails using the first protocol, iLO automatically tries the second protocol.
• Enable Stateless Address Auto Configuration (SLAAC)—Select this check box to enable iLO to
create IPv6 addresses for itself from router advertisement messages.
NOTE:
iLO will create its own link-local address even when this option is not selected.
• Primary DNS Server, Secondary DNS Server, Tertiary DNS Server—Enter the IPv6 addresses for
the DNS service.When DNS server locations are configured in both IPv4 and IPv6, both sources are
used, with preference given according to the iLO Client Applications use IPv6 first configuration option,
primary sources, then secondary, and then tertiary.
• Use DHCPv6 Supplied NTP Servers—Specifies whether iLO uses the DHCPv6 server-supplied time.
• Enable DDNS Server Registration—Specify whether iLO registers its IPv6 address and name with a
DNS server.
50 Using Intelligent Provisioning