5 Operation
5.13 Streaming measurement data using Bluetooth
5.13.1 General
Some IR cameras from FLIR Systems support Bluetooth communication, and to
those cameras you can stream measurement data from the meter. The data is
then merged into the result table in the IR image.
Streaming measurement data is a convenient way to add important information
to an IR image. For example, when identifying an overheated cable connection,
you may want to know the current in that cable.
The Bluetooth range is 10m (32ft) maximum.
5.13.2 Procedure
1.
Pair the IR camera with the instrument. Refer to the camera manual for infor-
mation on how to pair Bluetooth devices.
2.
Turn on the camera.
3.
Turn on the meter.
4.
Press the
5.
Choose the variable that you want to use (voltage, current, resistance, etc.).
Results from the meter will now automatically be displayed in the result table
in the top left corner of the IR camera screen.
#T559825; r. AI/33557/33557; en-US
on the meter to enable Bluetooth.
30