Shielding Contact Element - Siemens CPU 313C Hardware And Installation Manual

6KLHOGLQJ FRQWDFW HOHPHQW
The direct contact between the shielding contact element and the rail makes it
easy for you to connect all shielded cables of your S7 modules to ground.
Figure 5-2 Shielding contact element
 Shielding terminals
 Bracket
Mount the bracket (Order No. 6ES5 390-5AA0-0AA0) to the rail using the two
screw bolts. If you use a shielding contact element, the specified dimensions apply
from the lower edge of the module.
• Width of the shielding contact element: 80 mm
• Number of mountable shielding terminalsper shielding contact element: max 4
Table 5-3
Cable shielding diameter 2 mm to 6 mm
Cable shielding diameter 3 mm to 8 mm
Cable shielding diameter 4 mm to 13 mm
S7-300 Automation System, Hardware and Installation: CPU 31xC and CPU 31x
A5E00105492-03
1
7KH GLDJUDP LOOXVWUDWHV XQGHU QXPEHU
Shielding terminals - overview
&DEOH ZLWK VKLHOGLQJ GLDPHWHU
&RQILJXULQJ
2
6KLHOGLQJ WHUPLQDO RUGHU QR
6ES7 390-5AB00-0AA0
6ES7 390-5BA00-0AA0
6ES7 390-5CA00-0AA0
5-5