Siemens CPU 313C Hardware And Installation Manual page 113

&RPPLVVLRQLQJ
 ,Q WKLV &KDSWHU
,Q WKLV &KDSWHU
There are notes on commissioning which you should take into account in order to
avoid personal injury or damage to machines.
1RWH
Since your commissioning phase is determined primarily by your application, we
can only offer you general information, without claiming completeness of this topic.
&URVVUHIHUHQFH
Note the information about commissioning provided in the descriptions of your
plant section and equipment.
 &RPPLVVLRQLQJ 3URFHGXUH
5HTXLUHPHQWV
To utilize the full functional scope of the CPUs, you require
• STEP 7 V 5.1 + SP 4 and higher for CPUs 31xC, 312, 314, and 316-2 DP
• STEP 7 V 5.2 + SP 1 and higher for CPU 317-2 DP
• S7-300 is installed
• S7-300 is wired
• With networked S7-300:
MPI/PROFIBUS addresses are configured
–
The segments are terminated with active terminating resistors
–
S7-300 Automation System, Hardware and Installation: CPU 31xC and CPU 31x
A5E00105492-03
9-1