Selecting The Therapy Program; Patient Specific Settings; Stimulation With Cards - schwa-medico StimaWELL 120MTRS Operating Manual

58 OPERATING MANUAL STIMAWELL® 120MTRS
14.2.1

Selecting The Therapy Program

You can select between the thera-
py programs saved on the therapy
card. After the insertion of the
card, the number of the actual session rela-
tive to the program is selected. For the selec-
tion of a program, use the button Programs,
to have displayed the complete program list
of your patient and to select a program from
this list or, via button
program description for the marked pro-
gram.
14.3

Patient Specific Settings

If you wish to adjust general settings such as the mat temperature or the like, this can be
carried out in the main menu.
Information on changing the mat temperature can be found in Section 6.1.
Via the button Changing View
for the proportional intensity and change depending on the wishes of your patient
(Section 10).
By renewed touching on the button
the main menu.
If you have carried out changes you can, at all times, save the new settings to the
therapy card by touching on the button Save.
14.4

Stimulation With Cards

After starting a therapy program, the therapy can no longer be stopped, only paused and no
further program selection is possible. At the start of a therapy, the number of sessions saved
to the card will be reduced by one. Please note that during therapy, the card must remain in
the control unit. Removing the card will cause immediate discontinuation of the therapy.
If you wish to stop the therapy during the
session, depress the rotary/pressure control-
ler while the therapy session is paused. In this
case you will be asked if you really want to
end the therapy session.
Touch on Yes, to discontinue the session and to reset the program and stimulation time to the
start status. Touch on No, in order to not discontinue the session. In this case the session is
only paused and can at all times be re-started by turning on the rotary/pressure controller.
Info have displayed a
you can change as necessary to the settings menu
Changing View you close the setting menu and return to
EN