Technical Options - schwa-medico StimaWELL 120MTRS Operating Manual

52 OPERATING MANUAL STIMAWELL® 120MTRS
12.2.2

Technical Options

By touching on the selection field
Intensities all changes you have carried out
regarding the proportional intensities in the
basic settings are annulled. The proportional
intensities are reset to the status on delivery.
Activate or de-activate the remote control
unit via the selection field
Active.
With the selection field
determine if, during the stimulation, it is to be
checked if at least one electrode current
circuit is closed.
With the selection field
switch-on should be set directly to 40°C by the StimaWELL
If the selection field
a short acoustic signal.
If you use more than one StimaWELL®120MTRS device in your practice and wish to access all
patient data records via each of your devices, you need to assign a unique
each of your StimaWELL®120MTRS devices. Leave your first StimaWELL®120MTRS device at
device number 1. Set device number 2 using the arrow keys for your second device and con-
firm with OK. In this way, you can number up to 10 devices consecutively.
If a patient database is already present on your second or other StimaWELL®120MTRS device,
please select Convert Database
base is coordinated to the device number of this device.
You can now export the database of your second or other StimaWELL®120MTRS device to a
USB stick and import it into the database of your first device and vice versa. This allows you to
combine the databases of several StimaWELL®120MTRS devices on one device.
Important information if you maintain a common database for multiple StimaWELL®120MTRS
devices:

Please note that you may only assign a device number once to your devices and only then
convert the database, as otherwise internal database problems and possibly the loss of data
records can occur.

If you maintain a common database on multiple devices, it is important to regularly import
the databases of each of your devices to all other devices so that, for instance, a data record
does not show different therapy sessions on different devices. To this end, ideally choose a
fixed day on which you export the databases of your devices to a USB stick and import these
to the other devices respectively. Depending on the frequency with which your patients un-
dergo therapy sessions with you, this can typically be every two days or once a week.
Standard
Remote Control
Contact Check Off
Activate Heating At Switch-On
Signaller On is active, each sequence change within a program generates
when assigning the device number, so that the patient data-
you
you can determine if the mat heating at
®
120MTRS Control Unit.
EN
Device Number for