54
OPERATING MANUAL STIMAWELL® 120MTRS
12.5
Selecting The Language
Select the required operating language by
touching the respective selection field and
confirm your selection with OK. Please note
that with a change of language the Sti-
®
maWELL
120MTRS System must be restarted.
With
Cancel
you exit the menu without having
activated the change.
12.6
Software Update
You have the possibility to update the soft-
ware for your StimaWELL
Unit yourself. The necessary files for this
should be copied onto an empty USB flash
drive. As an alternative you can request a pre-
set USB flash drive from us. Insert the USB
flash drive in the USB slot on the front side of
the control unit. The requirements appear with
the selection of the menu point
The software now checks if there is a new
software version on the USB flash drive for
®
your StimaWELL
120MTRS Control Unit. If this
is the case, please start the update. The files
will now be copied to the control unit and
once the update has been successfully com-
pleted, the software restarts automatically.
®
120MTRS Control
Software Update
automatically.
EN