schwa-medico StimaWELL 120MTRS Operating Manual page 39

OPERATING MANUAL STIMAWELL® 120MTRS
9.3.2.1 Continuing In The Mode "Manual Program Selection"
Touch on Continue With Manual Program
program list which you have assigned to the patient. With patients in the mode
gram Selection you have at all times the option to manually select alternative programs for
the therapy session. Via the button
®
maWELL 120MTRS Control Unit or the program list of the patient and from which a program
can be selected (please see Section 8). Alternatively you can use the button
therapy programs from the program groups of the StimaWELL
see Section 7).
If no program has been entered in the in the patient profile, program groups for selection of a
therapy program for the actual session are displayed after touching
Program Selection. Please touch on the required group. The list of the programs of this group
is now displayed. Should a program group contain further sub-groups, the list will only then be
displayed after selection of the respective sub-group. Mark the required program by touching.
If there is an information text available for the marked program, the button
by touching this button the program description is displayed. Confirm your input after marking
the programs with OK, to select the marked program. The selected program is displayed in the
display field of the main menu and the patient is selected for treatment.
9.3.2.2 Starting A New Therapy Cycle
After touching the button
bration or start the therapy with the old calibration.
Touch on Perform New
form a side-differentiated calibration again.
You continue now as for the calibration of a
new patient (please see Section 9.2.3).
Select Continue With Old
accept the previously denominated values in
respect of the proportional intensities of the
individual channels for the new therapy. In
this case you continue with the selection of
the therapy mode (please see Section 9.2.4).
If you wish to start a new
Please Note:
therapy cycle after the completion of another
therapy cycle it is advisable to carry out a
renewed calibration. After completion of a
therapy it is possible that the degree of
stimulation felt on certain parts of the back
has changed.
Selection, to continue with the next program in the
Favourites
Start New Therapy Cycle
Calibration, to per-
Calibration, to
you can call up the favourites list of the Sti-
®
120MTRS Control Unit (please
decide if you wish to carry out a new cali-
EN 39
Manual Pro-
Programs to select
Continue With Manual
Info is active, and