Setting The Mat Size; Calibration / Setting The Partial Intensity For The Channels - schwa-medico StimaWELL 120MTRS Operating Manual

26 OPERATING MANUAL STIMAWELL® 120MTRS
will be cancelled by touching on the button
with Cancel you exit the input field without having implemented the changes.
To input a size or a weight please touch on the arrow fields left and right of the respective
field. The standard data are 180 cm / 80 kg and can be changed to values in the range 120 –
250 cm / 30 – 200 kg.
To input further data please touch on the button
can scroll through several pages of a window.
Simply touch on the field you wish to fill out in
order to open the respective input window.
Once you have entered all the required data
you arrive with Continue
determining the mat size. With
turn to Patient Administration
implemented the changes.
9.2.2

Setting The Mat Size

After confirming the patient data there opens
automatically the window for the setting of
the mat size (Please also see Section 6.3).
According to the size of your patient select the
mat size S, M or L. Confirm your selection with
Continue or return with
for the input of patient data.
9.2.3

Calibration / Setting The Partial Intensity For The Channels

The calibration follows after selecting the mat
size. If you have gone to the
and activated the
box, a window will open allowing you to select
Body Side Related Calibration
tion. The calibration is thereby a fine tuning of
the intensity of the individual channels. It is for
this reason that we would advise against skip-
ping the calibration. If you should nevertheless
touch on Skip Calibration, you arrive directly in
the window Select Therapy Mode
in the window for
Back you re-
without having
Back to the window
Therapy Options
Skip Calibration selection
or Skip Calibra-
(please see Section 9.2.4).
Delete . With
Extended/Basis. With this button you
OK the input is confirmed and
EN