18
OPERATING MANUAL STIMAWELL® 120MTRS
6.2
Setting The Stimulation Time
Setting the therapy duration time functions in the same way as for
setting the mat temperature. But please note that the therapy
duration can only be changed when no therapy program is running.
To set, touch the display
duration with the [+]- and [-] symbols. You can select the therapy
duration from 20-30 minutes in steps of 5 minutes.
The setting of the stimulation time in the mode
Please Note:
Automatic Program Selection Based On Indications
been enabled in the
Further information on
6.3
Setting The Mat Size
If you touch on the display
®
Of The StimaWELL
opens a window in which you can set the
mat size.
With size L the stimulation wave moves via
all 12 channels of the StimaWELL
tion Mat. With size M the two lower chan-
nels are inactive, the wave moves only via
10 channels. With size S only 8 channels
are used whereby the 4 lower channels of
®
the StimaWELL
Stimulation Mat are inac-
tive. This enables the area of the stimula-
tion area to be adapted to the body size of
the patient.
In some therapy programs not all channels of the StimaWELL
area of the cervical spine (CS), thoracic spine (TS) and lumbar spine (LS) are addressed. In such
cases and for each part area, 4 channels are active and their location matched exactly to the
size of the StimaWELL
The active channels appear in the window
®
The StimaWELL
Stimulation Mat
The setting of the mat size is not possible if you have selected a patient for
Please Note:
whom
Pain Therapy
ning.
Stimulation Time
Therapy
Options. More on therapy modes can be found in Section 9.2.4.
Therapy Options
Representation
Stimulation
Mat, there
®
Stimula-
®
Stimulation Mat.
in the main menu in black; the inactive channels are shaded.
in the mode
Automatic Program Selection Based On Indications
and set the therapy
is only then possible if this function has
can be found in Section 12.2.1.
Select A Size
in blue and in the
®
Stimulation Mat but only a part
Representation Of
EN
is run-