Receiving An Individual Call - Raymarine RAY230E Owner's Handbook Manual

3-36
Response
If a response is received after pressing the PTT switch, a receive-
confirmation message is displayed. After 5 seconds have elapsed, the
channel is shifted to a communication channel and the Individual Call is
completed.
If no response is received for 3 minutes after pressing the PTT switch, a
prompt to press the PTT switch appears once more. If the PTT switch is
not pressed within 15 seconds after the prompt appears, operation returns
to the state before the call.
PTT

3.5.26.3 Receiving an Individual Call

3.5.26.3 Receiving an Individual Call
3.5.26.3 Receiving an Individual Call 3.5.26.3 Receiving an Individual Call 3.5.26.3 Receiving an Individual Call
When an Individual Call is received, the DSC indicator flashes, INd appears
on the 7-segment display, and the DSC Received Alert is sounded. On the
dot matrix display appears the message RECEIVED IND CALL along with
a prompt to press ENT to accept or CLR to log the call. If the MMSI
number exists in the list, the associated name is displayed. If no match is
found, the actual numeric value of the MMSI is displayed.
Until either the ENT key or the CLR key are pressed, the prompt is flashed
at 1-second intervals and is accompanied by an alarm for up to 3 minutes.
If neither ENT nor CLR are pressed during these 3 minutes, the radio
reverts to the operation mode before receiving the Individual Call. The
DSC indicator continues to be flashed on the LCD display until the contents
of the log files can be confirmed.
ACK
3 min
NO ACK
Scrolls every 15 sec
Operations
5 sec
PTT