Raymarine RAY230E Owner's Handbook Manual page 74

3-52
3.5.30.3.2 Manual Entry of Lat/Longitude (L/L ENT) 3.5.30.3.2 Manual Entry of Lat/Longitude (L/L ENT) 3.5.30.3.2 Manual Entry of Lat/Longitude (L/L ENT) 3.5.30.3.2 Manual Entry of Lat/Longitude (L/L ENT) 3.5.30.3.2 Manual Entry of Lat/Longitude (L/L ENT)
This operation is used to manually enter the latitude/longitude and UTC
time when normal entry of the position information has been disabled.
1) As described in section 3.5.30.3 DSC Operation above, select the DSC
operation L/L ENT. The 7-segment display shows L L, while the dot
matrix display shows the latest latitude data.
2) Press one of the following keys to initiate the corresponding
operation:
K e y s K e y s K e y s K e y s K e y s
0 - 9 keys
ENT key
CLR key
SQ UP/
DOWN key
3) The subject items can be changed in the following order. Numeric values
that can be changed are flashing:
1. Degrees of lat at tens place
2. Degrees of lat at unit's place
3. Minutes of lat at tens place
4. Minutes of lat at unit's place
5. Degrees of lon at hundreds
6. Degrees of lon at tens place
7. Degrees of lon at unit's place
4) After changing the subject item, the display scrolls from latitude to
longitude to UTC. To submit the change of the position data as shown
in the display, press the ENT key. The unit exits Menu mode and returns
to normal operation.
To exit the Menu operation, press and hold the CLR key for 3 seconds.
The following illustration shows an example of the operation:
A c t i o n A c t i o n A c t i o n A c t i o n A c t i o n
Changes the flashing numeric value (see step 3), then
advances to the next digit's place.
Advances the (flashing) subject item to the next one
without changing the numeric value. Advances from
Latitude, to Longitude, to UTC.
Returns to the previous subject item.
For Latitude, alternates between N and S.
For Longitude, alternates between E and W.
For UTC, no effect.
8. Minutes of lon at tens place
9. Minutes of lon at unit's place
10. Hours of UTC at tens place
11. Hours of UTC at unit's place
12. Minutes of UTC at tens place
13. Minutes of UTC at units place
Operations