Individual (Routine) Calls; Making An Individual Call; Receiving An Individual Call - Raymarine RAY90 Installation And Operation Instruction Manual

7.5 Individual (routine) calls

Individual calls can be made to contacts saved in your Phonebook or to any station by manually
entering an MMSI number.
Note:
When calling a coast station there is no need to select a channel for communication.
If a call cannot be accepted then a reason code is displayed.
No Reason
Congestion
Busy
Queue
Barred
No operator
Unavailable
Disable
Unable Ch
Unable mode

Making an Individual call

From the Individual Call menu: Menu > DSC Calls > Individual Call.
1. Select Phonebook to make a routine call to a contact saved in your Phonebook, or
2. Select Recent Calls to make a routine call to a contact that you have called recently, or
3. Select Enter MMSI to manually enter the MMSI number of the station you want to contact.
4. Select a contact or enter an MMSI manually and press the OK button.
5. Select the Channel you want to transmit the call on.
If the MMSI is a CSR then the radio will automatically tune to the correct Channel. The radio will
wait for an acknowledgement to be received.
6. If an acknowledgement is received, press the OK button.
7. Press and hold the PTT button and speak your message.
8. Release the PTT button when you have completed your message.

Receiving an Individual call

With an incoming individual call displayed:
1. Select Show info from the options to review relevant call details.
2. Select Reply on Ch ## at any time to accept the call.
If auto channel change is turned on then the channel will automatically change after 10 seconds.
The radio is re-tuned to the specified channel.
3. To reject the call, select Reject.
4. If you rejected the call, select a reason for the rejection from the list.
Confirmation of the acceptance or rejection of the call is displayed. If you have accepted the call
then the radio will re-tune to the requested channel.
110
No reason given
Congestion at maritime switching centre
Station Busy
Queue indication
Station barred
No operator available
Operator temporarily unavailable
Equipment disabled
Unable to use proposed channel
Unable to use proposed mode