Raymarine RAY230E Owner's Handbook Manual page 29

Operations
FUNC indicator FUNC indicator FUNC indicator FUNC indicator FUNC indicator
Displayed when the FUNC key is pressed. Disappears when another
key is pressed, or after no other key is pressed for a period of time.
WX indicator WX indicator WX indicator WX indicator WX indicator
!
Displayed while in Weather Channel or Tri-Watch monitor mode. For
the RAY230E, this indicator only appears in the US frequency mode.
TX indicator TX indicator TX indicator TX indicator TX indicator
"
Displayed while transmitting.
CAN indicator (RAY230 only) CAN indicator (RAY230 only) CAN indicator (RAY230 only)
CAN indicator (RAY230 only) CAN indicator (RAY230 only)
#
Displayed when the Canadian frequency group is selected.
US indicator US indicator US indicator
US indicator US indicator
$
Displayed when the US frequency group is selected.
DESENS indicator DESENS indicator
DESENS indicator DESENS indicator DESENS indicator
%
Displayed during the desensitized receiving (local) mode.
INT indicator INT indicator
INT indicator INT indicator INT indicator
&
Displayed when the International frequency group is selected.
1W indicator 1W indicator 1W indicator 1W indicator 1W indicator
'
Displayed when the transmission power of 1W is selected with the
9/1/25 key or when a low power channel is selected.
MULTI indicator (RAY230E only) MULTI indicator (RAY230E only) MULTI indicator (RAY230E only) MULTI indicator (RAY230E only) MULTI indicator (RAY230E only)
Displayed while the channel stored in Multi-Call memory is displayed.
MEM indicator MEM indicator MEM indicator
MEM indicator MEM indicator
Displayed while the channel stored in memory is displayed. This
indicator flashes before the start of the memory scan operation.
SCAN indicator SCAN indicator SCAN indicator
SCAN indicator SCAN indicator
Displayed during Scan mode. If channels have been stored in memory,
this indicator will be flashing before the start of Scan mode.
MEM indicator MEM indicator
MEM indicator MEM indicator MEM indicator
Displayed while the channel stored in memory is displayed. This
indicator flashes before the start of the memory scan operation.
ATIS indicator ATIS indicator
ATIS indicator ATIS indicator ATIS indicator
!
Displayed when the ATIS (automatic identification transmission)
feature is turned on (via the Menu mode).
3-7