Raymarine RAY230E Owner's Handbook Manual page 86

3-64
Pressing the following keys initiate the corresponding operation:
K e y s K e y s K e y s K e y s K e y s
0 - 9 keys
ENT key
CLR key
4) Input your MMSI number using the numeric keypad.
5) Press the ENT key. The message ENT - ACCEPT, CLR - EXIT scrolls
across the display.
6) Press the ENT key to submit the number. The message ENTER MMSI
NO. AGAIN is displayed.
7) Press ENT. The nine underscore placeholders appear once more.
8) Again input the MMSI number with the numeric keypad.
9) Press ENT to submit. If the second MMSI number you input matches
the first, the message ENT - ACCEPT, CLR - EXIT is again displayed.
Note: If the two MMSI numbers don't match, the message MMSI NO. NOT
MATCH PRESS ENT scrolls across the display. Press ENT to exit the
Menu mode and try again from step 1.
10) Press ENT to verify. The message ENT - STORE, CLR - EXIT is
displayed.
11) Press ENT one last time to register the MMSI number in memory.
Operation returns to the mode before the Menu mode began.
To exit without making changes at any time, press and hold CLR for 3
seconds.
A c t i o n A c t i o n A c t i o n A c t i o n A c t i o n
Changes the flashing numeric value, then advances to
the next digit's place.
Advances the (flashing) subject item to the next one
without changing the numeric value. Advances to the
next screen after entering the last (ninth) digit.
Returns to the previous subject item. Pressing and
holding for 3 seconds exits the operation and returns
to the mode before the Menu Operation began.
Operations