Atis Operation (Ray230E Only); Alert Operation - Raymarine RAY230E Owner's Handbook Manual

Fixed mount
Hide thumbs Also See for RAY230E:
Table of Contents

Advertisement

Operations

3.5.27 ATIS Operation (RAY230E only)

3.5.27 ATIS Operation (RAY230E only)
3.5.27 ATIS Operation (RAY230E only)
3.5.27 ATIS Operation (RAY230E only)
3.5.27 ATIS Operation (RAY230E only)
The RAY230E European model comes equipped with ATIS capability for
inland waterway requirements in Europe. Your dealer or distributor must
first activate the ATIS feature before it can be utilized. Once activated, this
feature can be enabled or disabled in the system MENU so that the RAY230E
can be used in open water or inland waterways. With ATIS enabled, each
time the PTT switch is pressed your station ID is transmitted.

3.5.28 Alert Operation

3.5.28 Alert Operation
3.5.28 Alert Operation
3.5.28 Alert Operation
3.5.28 Alert Operation
This function emits various sounds to attract the operator's attention for
confirming a key operation, warning of an erroneous key operation, or
informing of a specific state. The different types of alert sounds are
described below.
1) Key Click
This sound is made when a handset key is pressed. In the On-Hook
state the sound emits from the external speaker; in the Off-Hook state
the sound emits from the handset speaker. The key click volume level
is determined by the sound volume setting.
2) Operation Error Alert
This alert sounds when an erroneous key operation is made. In the On-
Hook state the sound emits from the external speaker; in the Off-Hook
state the sound emits from the handset speaker. The alert tone volume
level is determined by the sound volume setting.
3) DSC Distress Alert
This sound is made when receiving a distress call in the DSC receiving
mode, receiving an acknowledgment to a transmitted distress signal,
or an Urgency signal to All Ships. The alert is output from the external
speaker at the maximum sound volume, regardless of the handset volume
setting.
4) DSC Received Alert
This sound is made when receiving an Individual Ships Call in DSC
receiving mode, a Group Ships Call, or a Safety call to All Ships. In this
case the sound is made from the external speaker. The alert is sounded
at maximum volume regardless of the volume setting.
3-45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ray230 us

Table of Contents