Raymarine RAY230E Owner's Handbook Manual page 80

3-58
3) To enter the nickname, use the numeric keys (0 through 9) to input their
associated alpha or numeric value (refer to section 3.2 Controls and
LCD Display). The currently selected location is indicated by a flashing
"–" character. After inputting the desired letter or numeral, press the
ENT key to submit the entry and proceed to the next place. To go back
by 1 digit, press the CLR key.
If no nickname is to be registered, press the ENT key for all characters
so that they all display a "–".
1-8
If the maximum 20 stations are already registered, this
display is shown and the radio shifts to Delete mode
To DELETE mode
ENT
REPEAT
Flashing
Note:
The 0 key will enter only the numeral "0", while the 1 key will alternately
enter "1" and "space". The 0 and 1 keys do not have associated alpha
characters.
ENT ON
After "MMSI" is displayed, the
flashing segment is ready for input
ENT
Flashing
2/ABC
Flashing
ENT
press 0
Flashing
7/PQRS
Flashing
ENT
Flashing
ENT
Operations
Pressing ENT while "Y" is displayed
registers the station and exits Menu
mode.
Pressing ENT while "N" is displayed
exits Menu mode without registering
the station.