Electrical Connections; Dc Power And Hailer/Nmea Cable Connections - Raymarine RAY230E Owner's Handbook Manual

Installation
2.4 2.4

Electrical Connections

Electrical Connections
2.4 2.4 Electrical Connections 2.4 Electrical Connections Electrical Connections

2.4.1 DC Power and Hailer/NMEA Cable Connections

2.4.1 DC Power and Hailer/NMEA Cable Connections 2.4.1 DC Power and Hailer/NMEA Cable Connections 2.4.1 DC Power and Hailer/NMEA Cable Connections 2.4.1 DC Power and Hailer/NMEA Cable Connections
The 6-foot long power cable is a multipurpose assembly containing three
wire-pairs for connections to DC power, NMEA input, and the Hailer Horn
Wire Color Wire Color Wire Color Function
Wire Color Wire Color
RED
BLACK
YELLOW
GREEN
WHITE
BLACK
The RED (+) power wire contains a 10 amp in-line fuse.
Figure 2-3 Power/Hailer/NMEA Cable and 6-pin Connector Figure 2-3 Power/Hailer/NMEA Cable and 6-pin Connector
Figure 2-3 Power/Hailer/NMEA Cable and 6-pin Connector Figure 2-3 Power/Hailer/NMEA Cable and 6-pin Connector Figure 2-3 Power/Hailer/NMEA Cable and 6-pin Connector
speaker. Connections to the 6-pin connector are as follows:
In most cases the length of the power cable should be adequate enough to
reach the DC power source. If additional wire length is required, the cable
can be extended by adding more cable as necessary. However, for power
cable runs longer than 15 feet, larger wire diameter size should be used to
Function Function Function Connects to Connects to Connects to
Function Connects to Connects to
Power + Ship's 13.2 VDC power
Power –
Hailer + Hailer Horn speaker
Hailer –
NMEA + Input from position source (GPS,
NMEA – LORAN)
2-4