Electrical Connections; Dc Power And Hailer/Nmea Cable Connections - Raymarine Ray230 Owner's Handbook Manual

Modular vhf radio
Hide thumbs Also See for Ray230:
Table of Contents

Advertisement

2-4
2.4

Electrical Connections

2.4.1

DC Power and Hailer/NMEA Cable Connections

The 6-foot-long power cable is a multipurpose assembly containing three
wire-pairs for connections to DC power, NMEA input, and the Hailer Horn
speaker. Connections to the 6-pin connector are as follows:
Wire Color
Wire Color
Wire Color
Wire Color
Wire Color
RED
BLACK
YELLOW
GREEN
WHITE
BLACK
The RED (+) power wire contains a 10 amp in-line fuse.
Figure 2-3 Power/Hailer/NMEA Cable and 6-pin Connector
In most cases the length of the power cable should be adequate enough to
reach the DC power source. If additional wire length is required, the cable
can be extended by adding more cable as necessary. However, for power
cable runs longer than 15 feet, larger wire diameter size should be used to
prevent voltage line loss.
Function
Function
Connects to
Connects to
Function
Function
Function
Connects to
Connects to
Connects to
Power +
Ship's 13.2 VDC power
Power –
Hailer +
Hailer Horn speaker
Hailer –
NMEA +
Input from position source (GPS)
NMEA –
Installation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ray230e

Table of Contents